Mvr Querytime; Mvr Vlan; Mvr Immediate - NETGEAR ProSafe M7100-24X User Manual

no mvr mode
This command sets the mode type to the default value.
Format
no mvr mode
Mode Global Config

mvr querytime

This command sets the MVR query response time.
Format
mvr querytime<1-100>
Mode Global Config
Default 5
no mvr querytime
This command sets the MVR query response time to the default value.
Format
no mvr querytime
Mode Global Config

mvr vlan

This command sets the MVR multicast VLAN.
Format
mvr vlan <1-4094>
Mode Global Config
Default 1
no mvr vlan
This command sets the MVR multicast VLAN to the default value.
Format
no mvr vlan
Mode Global Config

mvr immediate

This command enables MVR immediate leave mode. MVR has two modes of operating with the
IGMP Leave messages: normal leave and immediate leave:
• In normal leave mode, when a leave is received, the general IGMP query is sent from a
Layer 2 switch to the receiver port, where the leave was received. Then reports are
ProSafe Managed Switch
Multicast VLAN Registration (MVR)
211