Area Nssa Translator-Stab-Intv (Ospf); Area Range (Ospf) - NETGEAR ProSafe M7100-24X User Manual

of candidate causes the router to participate in the translator election process when it
attains border router status.
Format
area <areaid> nssa translator-role {always | candidate}
Mode
Router OSPF Config
no area nssa translator-role (OSPF)
This command disables the nssa translator role from the specified area id.
Format
no area <areaid> nssa translator-role {always | candidate}
Mode
Router OSPF Config

area nssa translator-stab-intv (OSPF)

This command configures the translator <stabilityinterval> of the NSSA. The
<stabilityinterval> is the period of time that an elected translator continues to perform
its duties after it determines that its translator status has been deposed by another router.
Format
area <areaid> nssa translator-stab-intv <stabilityinterval>
Mode
Router OSPF Config
no area nssa translator-stab-intv (OSPF)
This command disables the nssa translator's <stabilityinterval> from the specified
area id.
Format
no area <areaid> nssa translator-stab-intv <stabilityinterval>
Mode
Router OSPF Config

area range (OSPF)

Use this command in Router Configuration mode to configure a summary prefix that an area
border router advertises for a specific area.
Default
No area ranges are configured by default. No cost is configured by default.
Format area areaid range prefix netmask {summarylink |
nssaexternallink} [advertise | not-advertise] [cost cost]
Mode
OSPFv2 Router Configuration
Parameter Description
area-id The area identifier for the area whose networks are to be summarized.
prefix netmask The summary prefix to be advertised when the ABR computes a route to one or more
networks within this prefix in this area.
ProSafe Managed Switch
Routing Commands
263