NETGEAR ProSafe M7100-24X User Manual page 710

Table 23. Mac-based VLANs Log Messages
Component Message
Mac based
vlanMacVlanChangeCallback: Failed to
VLANS
add an entry
Mac based
vlanMacVlanChangeCallback: Failed to
VLANS
delete an entry
Table 24. 802.1x Log Messages
Component Message
802.1X
function: Failed calling dot1xIssueCmd
802.1X
function: EAP message not received from
server
802.1X
function: Out of System buffers
802.1X
function: could not set state to
<authorized/unauthorized>, intf xxx
802.1X
dot1xApplyConfigData: Unable to
<enable/disable> dot1x in driver
802.1X
dot1xSendRespToServer:
dot1xRadiusAccessRequestSend failed
802.1X
dot1xRadiusAcceptProcess: error calling
radiusAccountingStart, ifIndex=xxx
802.1X
function: failed sending terminate cause,
intf xxx
Table 25. IGMP Snooping Log Messages
Component Message
IGMP Snooping function: osapiMessageSend failed
IGMP Snooping Failed to set global igmp snooping mode to
xxx
IGMP Snooping Failed to set igmp snooping mode xxx for
interface yyy
IGMP Snooping Failed to set igmp mrouter mode xxx for
interface yyy
IGMP Snooping Failed to set igmp snooping mode xxx for
vlan yyy
ProSafe Managed Switch
Cause
This appears when a dtl fails to add an
entry for a vlan add notify event.
This appears when a dtl fails to delete an
entry for an vlan delete notify event.
Cause
802.1X message queue is full
RADIUS server did not send required EAP
message
802.1X cannot process/transmit message
due to lack of internal buffers
DTL call failed setting authorization state of
the port
DTL call failed enabling/disabling 802.1X
Failed sending message to RADIUS server
Failed sending accounting start to RADIUS
server
Failed sending accounting stop to RADIUS
server
Cause
IGMP Snooping message queue is full
Failed to set global IGMP Snooping mode
due to message queue being full
Failed to set interface IGMP Snooping
mode due to message queue being full
Failed to set interface multicast router
mode due to IGMP Snooping message
queue being full
Failed to set VLAN IGM Snooping mode
due to message queue being full
Log Messages
710