Show Interface Counters - NETGEAR ProSafe M7100-24X User Manual

The display parameters, when the argument is "switchport" are as follows:
Term Definition
Packets
The total number of packets (including broadcast packets and multicast packets)
Received
received by the processor.
Without Error
Broadcast
The total number of packets received that were directed to the broadcast address. Note
Packets
that this does not include multicast packets.
Received
Packets
The number of inbound packets that contained errors preventing them from being
Received With
deliverable to a higher-layer protocol.
Error
Packets
The total number of packets transmitted out of the interface.
Transmitted
Without Error
Broadcast
The total number of packets that higher-level protocols requested to be transmitted to the
Packets
Broadcast address, including those that were discarded or not sent.
Transmitted
Transmit Packet
The number of outbound packets that could not be transmitted because of errors.
Errors
Address Entries
The total number of Forwarding Database Address Table entries now active on the
Currently In Use
switch, including learned and static entries.
VLAN Entries
The number of VLAN entries presently occupying the VLAN table.
Currently In Use
Time Since
The elapsed time, in days, hours, minutes, and seconds since the statistics for this switch
Counters Last
were last cleared.
Cleared

show interface counters

This command reports key summary statistics for all ports (physical, CPU, and port-channel).
Format
show interface counters
Mode
Privileged EXEC
The following shows example CLI display output for the command.
(Routing) #show interface counters
Port InOctets
--------- ---------------- ---------------- ---------------- ----------------
0/1 0
0/2 0
0/3 15098
0/4 0
0/5 0
0/6 0
0/7 0
0/8 0
0/9 0
0/10 0
0/11 0
ProSafe Managed Switch
InUcastPkts InMcastPkts
0 0
0 0
0 31
0 0
0 0
0 0
0 0
0 0
0 0
0 0
0 0
Utility Commands
515
InBcastPkts
0
0
39
0
0
0
0
0
0
0
0