Rmon Event - NETGEAR ProSafe M7100-24X User Manual

Parameter Description
hcalarm alarm The identifier of the hcalarm instance.
number
High Capacity The object identifier of the particular variable to be sampled. Only variables that resolve to an
Alarm Variable ASN.1 primitive type of integer.
High Capacity The interval in seconds over which the data is sampled and compared with the rising and
Alarm interval falling thresholds. The range is 1to 2147483647.
High Capacity The method of sampling the selected variable and calculating the value to be compared
Alarm Sample Type against thresholds. Possible types are Absolute or Delta.
Rising-Threshold High capacity alarm rising threshold absolute value high. The upper 32 bits of the absolute
High Value value for threshold for the sampled statistics.
Rising-Threshold High capacity alarm rising threshold absolute value low. The lower 32 bits of the absolute
Low Value value for threshold for the sampled statistics.
Falling-Threshold High capacity alarm falling threshold absolute value high. The upper 32 bits of the absolute
High Value value for threshold for the sampled statistic.
Falling-Threshold High capacity alarm falling threshold absolute value high. The upper 32 bits of the absolute
Low Value value for threshold for the sampled statistic.
Rising/Falling/ High capacity alarm startup alarm that may be sent. Possible values are Rising Alarm, Falling
Rising-Falling Alarm or both.
Owner String High capacity alarm owner. The owner string associated with the entry.
no rmon hcalarm
This command deletes the rmon hcalarm entry.
Format
no rmon hcalarm <alarm number>
Mode
Global Config

rmon event

This command sets the rmon event entry in the RMON event mib group.
Format
rmon event <event number> [description|log|owner|trap]
Mode
Global Config
ProSafe Managed Switch
Utility Commands
606