Set Igmp Interfacemode; Set Igmp Fast-Leave - NETGEAR ProSafe M7100-24X User Manual

• Flooding of unregistered multicast data packets to all ports in the VLAN.
Default
disabled
Format
set igmp
Mode
• Global Config
• Interface Config
Format
set igmp <vlanid>
Mode
VLAN Config
no set igmp
This command disables IGMP Snooping on the system, an interface or a VLAN.
Format
no set igmp
Mode
• Global Config
• Interface Config
Format
no set igmp <vlanid>
Mode
VLAN Config

set igmp interfacemode

This command enables IGMP Snooping on all interfaces. If an interface has IGMP Snooping
enabled and you enable this interface for routing or enlist it as a member of a port-channel
(LAG), IGMP Snooping functionality is disabled on that interface. IGMP Snooping
functionality is re-enabled if you disable routing or remove port-channel (LAG) membership
from an interface that has IGMP Snooping enabled.
Default
disabled
Format
set igmp interfacemode
Mode
Global Config
no set igmp interfacemode
This command disables IGMP Snooping on all interfaces.
Format
no set igmp interfacemode
Mode
Global Config

set igmp fast-leave

This command enables or disables IGMP Snooping fast-leave admin mode on a selected
interface or VLAN. Enabling fast-leave allows the switch to immediately remove the layer 2
ProSafe Managed Switch
Switching Commands
147