Parameter
Description
Event Number
Event identifier
Event Type
The type of notification that the probe will make about the event. Possible values are:
•
None
•
Log
•
SNMP Trap
•
Log and SNMP Trap
no rmon event
This command deletes the rmon event entry.
Format
no rmon event <event number>
Mode
Global Config
rmon collection history
This command sets the history control parameters of the RMON historyControl mib group.
Format
rmon collection history <index number> [buckets|interval|owner]
Mode
Interface Config
no rmon collection history
This command deletes the history control group entry with the specified index number.
Format
no rmon collection history <index number>
Mode
Interface Config
show rmon
This command displays the entries in the RMON alarm table.
Format
show rmon {alarms | alarm <alarm-index>}
Mode
Privileged Exec
show rmon collection history
This command displays the entries in the RMON history control table.
Format
show rmon collection history
Mode
Privileged Exec
ProSafe Managed Switch
Utility Commands
607