NETGEAR ProSafe M7100-24X User Manual page 16

Table 6. CLI Mode Access and Exit (Continued)
Command Mode Access Method
Ipv6-Class-Map From the Global Config mode,
Config enter
class-map and specify the
optional keyword ipv6 to specify
the Layer 3 protocol for this class.
See
more information.
Router OSPF From the Global Config mode,
Config enter
router ospf.
Router OSPFv3 From the Global Config mode,
Config enter
ipv6 router ospf.
Router RIP From the Global Config mode,
Config enter
router rip.
MAC Access-list From the Global Config mode,
Config enter
mac access-list extended
<name>.
TACACS Config From the Global Config mode,
enter tacacs-server host
<ip-addr>, where <ip-addr> is
the IP address of the TACACS
server on your network.
DHCP Pool From the Global Config mode,
Config enter
ip dhcp pool <pool-name>.
DHCPv6 Pool From the Global Config mode,
Config enter
ip dhcpv6 pool <pool-name>.
Stack Global From the Global Config mode,
Config Mode enter the stack command.
ARP Access-List From the Global Config mode,
Config Mode enter the
command.
Command Completion and Abbreviation
Command completion finishes spelling the command when you type enough letters of a
command to uniquely identify the command keyword. Once you have entered enough letters,
press the SPACEBAR or TAB key to complete the word.
ProSafe M4100 Series Managed Switches
class-map on page 466 for
arp access-list
Using the Command-Line Interface
Exit or Access Previous Mode
To exit to the Global Config mode, enter exit. To
return to the Privileged EXEC mode, enter
Ctrl-Z.
To exit to the Global Config mode, enter exit. To
return to the Privileged EXEC mode, enter
Ctrl-Z.
To exit to the Global Config mode, enter exit. To
return to the Privileged EXEC mode, enter
Ctrl-Z.
To exit to the Global Config mode, enter exit. To
return to the Privileged EXEC mode, enter
Ctrl-Z.
To exit to the Global Config mode, enter exit. To
return to the Privileged EXEC mode, enter
Ctrl-Z.
To exit to the Global Config mode, enter exit. To
return to the Privileged EXEC mode, enter
Ctrl-Z.
To exit to the Global Config mode, enter exit. To
return to the Privileged EXEC mode, enter
Ctrl-Z.
To exit to the Global Config mode, enter exit. To
return to the Privileged EXEC mode, enter
Ctrl-Z.
To exit to the Global Config mode, enter the exit
command. To return to the Privileged EXEC
mode, enter Ctrl-Z.
To exit to the Global Config mode, enter the
exit command. To return to the Privileged
EXEC mode, enter Ctrl-Z
16
.