Show Lldp Remote-Device Detail - NETGEAR ProSafe M7100-24X User Manual

Term Definition
Port ID
The port number that transmitted the LLDPDU.
System Name
The system name of the remote device.
Example: The following shows example CLI display output for the command.
(switch) #show lldp remote-device all
LLDP Remote Device Summary
Local
Interface RemID Chassis ID
------- ------- --------------------
0/1
0/2
0/3
0/4
0/5
0/6
0/7 2 00:FC:E3:90:01:0F
0/7 3 00:FC:E3:90:01:0F
0/7 4 00:FC:E3:90:01:0F
0/7 5 00:FC:E3:90:01:0F
0/7 1 00:FC:E3:90:01:0F
0/7 6 00:FC:E3:90:01:0F
0/8
0/9
0/10
0/11
0/12
--More-- or (q)uit

show lldp remote-device detail

Use this command to display detailed information about remote devices that transmit current
LLDP data to an interface on the system.
Format
show lldp remote-device detail <unit/slot/port>
Mode
Privileged EXEC
Term Definition
Local Interface
The interface that received the LLDPDU from the remote device.
Remote
An internal identifier to the switch to mark each remote device to the system.
Identifier
Chassis ID
The type of identification used in the Chassis ID field.
Subtype
Chassis ID
The chassis of the remote device.
Port ID Subtype The type of port on the remote device.
ProSafe Managed Switch
Port ID
------------------
00:FC:E3:90:01:11
00:FC:E3:90:01:12
00:FC:E3:90:01:13
00:FC:E3:90:01:14
00:FC:E3:90:03:11
00:FC:E3:90:04:11
Switching Commands
178
System Name
------------------