Set Mld Mrouter Interface; Show Mldsnooping - NETGEAR ProSafe M7100-24X User Manual

no set mld mrouter
Use this command to disable multicast router attached mode for a VLAN with a particular
VLAN ID.
Format
no set mld mrouter vlanid
Mode
Interface Config

set mld mrouter interface

Use this command to configure the interface as a multicast router-attached interface. When
configured as a multicast router interface, the interface is treated as a multicast
router-attached interface in all VLANs.
Default
disabled
Format
set mld mrouter interface
Mode
Interface Config
no set mld mrouter interface
Use this command to disable the status of the interface as a statically configured multicast
router-attached interface.
Format
no set mld mrouter interface
Mode
Interface Config

show mldsnooping

Use this command to display MLD Snooping information. Configured information is displayed
whether or not MLD Snooping is enabled.
Format
show mldsnooping [unit/slot/port | vlanid]
Mode
Privileged EXEC
When the optional arguments
displays the following information.
Term Definition
Admin Mode
Indicates whether or not MLD Snooping is active on the switch.
Interfaces
Interfaces on which MLD Snooping is enabled.
Enabled for
MLD Snooping
ProSafe Managed Switch
or
unit/slot/port vlanid
Switching Commands
162
are not used, the command