Show Sntp Server - NETGEAR ProSafe M7100-24X User Manual

show sntp server

This command is used to display SNTP server settings and configured servers.
Format
show sntp server
Mode
Privileged EXEC
Term Definition
Server Host
IP address or hostname of configured SNTP Server.
Address
Server Type
Address Type of Server.
Server Stratum
Claimed stratum of the server for the last received valid packet.
Server
Reference clock identifier of the server for the last received valid packet.
Reference ID
Server Mode
SNTP Server mode.
Server
Total number of SNTP Servers allowed.
Maximum
Entries
Server Current
Total number of SNTP configured.
Entries
For each configured server:
Term Definition
Host Address
IP address or hostname of configured SNTP Server.
Address Type
Address Type of configured SNTP server.
Priority
IP priority type of the configured server.
Version
SNTP Version number of the server. The protocol version used to query the server in
unicast mode.
Port
Server Port Number.
Last Attempt
Last server attempt time for the specified server.
Time
Last Update
Last server attempt status for the server.
Status
Total Unicast
Number of requests to the server.
Requests
Failed Unicast
Number of failed requests from server.
Requests
ProSafe Managed Switch
Utility Commands
556