Show Lldp Local-Device - NETGEAR ProSafe M7100-24X User Manual

Term Definition
Port ID
The port number that transmitted the LLDPDU.
System Name
The system name of the remote device.
System
Describes the remote system by identifying the system name and versions of hardware,
Description
operating system, and networking software supported in the device.
Port
Describes the port in an alpha-numeric format. The port description is configurable.
Description
System
Indicates the primary function(s) of the device.
Capabilities
Supported
System
Shows which of the supported system capabilities are enabled.
Capabilities
Enabled
Management
For each interface on the remote device with an LLDP agent, lists the type of address the
Address
remote LLDP agent uses and specifies the address used to obtain information related to
the device.
Time To Live
The amount of time (in seconds) the remote device's information received in the
LLDPDU should be treated as valid information.
Example: The following shows example CLI display output for the command.
(Switch) #show lldp remote-device detail 0/7
LLDP Remote Device Detail
Local Interface: 0/7
Remote Identifier: 2
Chassis ID Subtype: MAC Address
Chassis ID: 00:FC:E3:90:01:0F
Port ID Subtype: MAC Address
Port ID: 00:FC:E3:90:01:11
System Name:
System Description:
Port Description:
System Capabilities Supported:
System Capabilities Enabled:
Time to Live: 24 seconds

show lldp local-device

Use this command to display summary information about the advertised LLDP local data.
This command can display summary information or detail for each interface.
Format
show lldp local-device {<unit/slot/port> | all}
Mode
Privileged EXEC
ProSafe Managed Switch
Switching Commands
179