NETGEAR ProSafe M7100-24X User Manual page 466

Term Definition
Conform Action The current setting for the action taken on a packet considered to conform to the policing
parameters. This is not displayed if policing is not in use for the class under this policy.
Conform COS
The CoS mark value if the conform action is set-cos-transmit.
Conform DSCP
The DSCP mark value if the conform action is set-dscp-transmit.
Value
Conform IP
The IP Precedence mark value if the conform action is set-prec-transmit.
Precedence
Value
Drop
Drop a packet upon arrival. This is useful for emulating access control list operation using
DiffServ, especially when DiffServ and ACL cannot co-exist on the same interface.
Mark CoS
The class of service value that is set in the 802.1p header of inbound packets. This is not
displayed if the mark cos was not specified.
Mark IP DSCP
The mark/re-mark value used as the DSCP for traffic matching this class. This is not
displayed if mark ip description is not specified.
Mark IP
The mark/re-mark value used as the IP Precedence for traffic matching this class. This is
Precedence
not displayed if mark ip precedence is not specified.
Mirror
Copies a classified traffic stream to a specified egress port (physical port or LAG). This
can occur in addition to any marking or policing action. It may also be specified along
with a QoS queue assignment.
Non-Conform
The current setting for the action taken on a packet considered to not conform to the
Action
policing parameters. This is not displayed if policing not in use for the class under this
policy.
Non-Conform
The CoS mark value if the non-conform action is set-cos-transmit.
COS
Non-Conform
The DSCP mark value if the non-conform action is set-dscp-transmit.
DSCP Value
Non-Conform IP
The IP Precedence mark value if the non-conform action is set-prec-transmit.
Precedence
Value
Policing Style
The style of policing, if any, used (simple).
Redirect
Forces a classified traffic stream to a specified egress port (physical port or LAG). This
can occur in addition to any marking or policing action. It may also be specified along
with a QoS queue assignment.
If the Policy Name is not specified this command displays a list of all defined DiffServ policies.
The following fields are displayed:
Term Definition
Policy Name
The name of this policy. (The order in which the policies are displayed is not necessarily
the same order in which they were created.)
ProSafe Managed Switch
Quality of Service (QoS) Commands
466