Show Mvr; Show Mvr Members - NETGEAR ProSafe M7100-24X User Manual

no mvr vlan
Use this command to exclude the port from the specific MVR group.
Format
no mvr vlan <mVLAN> group <A.B.C.D>
Mode Interface Config

show mvr

This command displays global MVR settings.
Format
show mvr
Mode Privileged EXEC
The following table explains the output parameters.
Term
MVR Running
MVR multicast VLAN
MVR Max Multicast Groups
MVR Current multicast groups
MVR Query response time
MVR Mode
Example:
(Switch)#show mvr
MVR Running.............................. TRUE
MVR multicast VLAN....................... 1200
MVR Max Multicast Groups................. 256
MVR Current multicast groups............. 1
MVR Global query response time........... 10 (tenths of sec)
MVR Mode................................. compatible

show mvr members

This command displays the MVR membership groups allocated. <A.B.C.D> is a valid multicast
address in IPv4 dotted notation.
Format
show mvr members [<A.B.C.D>]
Mode Privileged EXEC
ProSafe Managed Switch
Definition
MVR running state. It can be enabled or disabled.
Current MVR multicast VLAN. It can be in the range from 1 to
4094.
The maximum number of multicast groups supported by MVR.
The current number of MVR groups allocated.
The current MVR query response time.
The current MVR mode. It can be compatible or dynamic.
Multicast VLAN Registration (MVR)
213