Lacp Actor System Priority; Lacp Partner Admin Key - NETGEAR ProSafe M7100-24X User Manual

no lacp actor port priority
Use this command to configure the default priority value assigned to the Aggregation Port.
Format
no lacp actor port priority
Mode
Interface Config

lacp actor system priority

Use this command to configure the priority value associated with the LACP Actor's SystemID.
The range for <priority> is 0 to 65535.
Default
32768
Format
lacp actor system priority <priority>
Mode
Interface Config
Note: This command is only applicable to physical interfaces.
no lacp actor system priority
Use this command to configure the priority value associated with the Actor's SystemID.
Format
no lacp actor system priority
Mode
Interface Config

lacp partner admin key

Use this command to configure the administrative value of the Key for the protocol partner.
The valid range for <key> is 0 to 65535.
Default
0x0
Format
lacp partner admin key
Mode
Interface Config
Note: This command is only applicable to physical interfaces.
ProSafe Managed Switch
Switching Commands
108