Host - IBM BladeCenter S SAS RAID Controller Module Installation And User Manual

Running the global spare command with the -delete option deletes a global spare.
Specify the drive by bay position or number. When you specify the drive by a
number, that number refers to the sequence number that appears on the list
displayed on running this command with the -get option. Run this command with
the -get option just before running it with the -delete number option to make an
internal reference list. An error message is displayed if you run the global spare
command with the -delete option without first running it with the -get option.
Example:
<CLI> global spare –delete –slot 1
Global spare deleted from Controller Enclosure 1.
<CLI> global spare –get
Drive#
0
1
2
<CLI> global spare –delete –number 2
Global spare deleted from Controller Enclosure 1.

host

Use this command to add a host World Wide Name (WWN) to the controller list of
hosts or to get the list of hosts added to the controller .
Command arguments:
<CLI>host –[add WWN| get]
Where:
v WWN - Specifies host WWN to add to controller list of hosts or host WWN for
Examples:
<CLI> host –add 1234567890abcdef
Host added with WWN 1234567890abcdef.
<CLI> host –get
HostWWN 784875485454 : LUNs Mapped
LUN
3
HostWWN 123456789abcdef0 : No LUNs Mapped
HostWWN 123456789abcdef1 : No LUNs Mapped
84
IBM SAS RAID Controller Module: Installation and User's Guide IBM BladeCenter S SAS RAID Controller Module
Enclosure SerialNo Cap
2 J3YWKGSJ 33GB
1 J3YXDVJJ 33GB
1 JBV1HE7J 33GB
which logical unit numbers (LUNs) will be mapped.
Pool Usage State
-- GLS OK
-- GLS OK
-- GLS OK
Permission
ACCESS_READWRITE
Ct10 Ct11 RPM
1 1 0
1 1 0
1 1 0
Volume
pool1:vol1