Battery Alerts - IBM BladeCenter S SAS RAID Controller Module Installation And User Manual

0206 Battery battery_ID connected to memory
Explanation: Battery has been connected to memory and will provide some amount of battery backup.
System action: By default, the SAS RAID Module system information indicator is not turned on and the operator is
not notified of this alert by e-mail. Alert clears automatically.
Operator response: None.
0207 Battery battery_ID disconnected from memory
Explanation: Battery has been disconnected from memory and no longer provides any battery backup. This event is
part of an orderly shutdown process.
System action: By default, the SAS RAID Module system information indicator is not turned on and the operator is
not notified of this alert by e-mail. Alert clears automatically.
Operator response: None.
0208 Battery change notification received (present=[0|1], swapped=[0|1])
Explanation: A battery change notification has been received.
System action: By default, the SAS RAID Module system information indicator is not turned on and the operator is
not notified of this alert by e-mail. Alert clears automatically.
Operator response: None.
0209 Battery battery_ID non-volatile memory read
Explanation: Battery has non-volatile memory that was read during BBU detection.
System action: By default, the SAS RAID Module system information indicator is not turned on and the operator is
not notified of this alert by e-mail. Alert clears automatically.
Operator response: None
0210 Battery battery_ID non-volatile memory written
Explanation: Battery has non-volatile memory that was written during BBU detection.
System action: By default, the SAS RAID Module system information indicator is not turned on and the operator is
not notified of this alert by e-mail. Alert clears automatically.
Operator response: None

Battery alerts

The alerts in this section are generated to inform the operator of changes in battery
status.
Chapter 11. Troubleshooting and support
0206 • 0210
125