Subscribing To Notifications; Installing And Configuring Firmware Updates - IBM BladeCenter S SAS RAID Controller Module Installation And User Manual

Subscribing to notifications

About this task
My Notifications is a service that can automatically email you when new
information or code is available for your IBM BladeCenter product. To subscribe,
start at the IBM BladeCenter Support web page: http://www.ibm.com/systems/
support/.
Procedure
1. Locate the Stay Informed section of the page and click Subscribe today.
2. Click BladeCenter
3. From the BladeCenter section of the Support Subscriptions page click
4. At the My subscriptions page, select BladeCenter S and click Submit
5. From within the Notify me by area, select the following: email, weekly, html.
6. From within the Type area select the machine type of the BladeCenter S
7. From within the Operating System area, select the operating system you use
8. From within the Selections area, select Troubleshooting, Download, and

Installing and configuring firmware updates

To obtain the latest IBM BladeCenter S SAS RAID Controller Module firmware
update configuration and installation instructions, visit the IBM Support website at
http://www.ibm.com/support/. Follow the instructions attached to the code
package to install and configure firmware updates.
34
IBM SAS RAID Controller Module: Installation and User's Guide IBM BladeCenter S SAS RAID Controller Module
BladeCenter notifications.
Note: Log in with your IBM ID and password. If you don't yet have an IBM
ID, you can register using your email address. You are prompted to create a
password, a password hint and to provide your country of residence.
(typically 8886).
with the BladeCenter SAS RAID Controller Module.
Install, or other items of interest to you.