Shellscript; Show Raid Levels - IBM BladeCenter S SAS RAID Controller Module Installation And User Manual

Where:
v -getreason lists any appropriate recovery options.
Example:
<CLI> service mode –getreason
Current Machine Local Time: 08/26/2008 03:35:15 PM
The reason for service mode is "DRV_MISMATCH_RB".
Reason details : "Rebinder does not see the same drives as survivor."
Recovery Hints : "Reboot or Replace the controller"

shellscript

The shellscript command runs a shell script in the RAID controller.
Command arguments:
<CLI> shellscript –file name [-param "ANYSTRING"]
Where:
v -file is a required parameter that specifies the file to be run.
v -param is an optional parameter that is passed to the shell script. ANYSTRING must
be enclosed in quotation marks, and can contain any printable characters. If the
-param option is not specified, RAID Controller CLI passes a null string as a
parameter to the shell script.
Example:
<cli> shellscript –file somefile.ext

show raid levels

The show raid levels command displays the list of currently supported raid levels
in the system.
Command arguments:
<CLI> show raid levels
Example:
<CLI> show raid levels
Following Raid Levels are supported by the system:
RAID 0
RAID 5
RAID 1
RAID 10
Chapter 8. Using the RAID Controller command line interface
75