Removing And Reinserting An Active Controller - IBM BladeCenter S SAS RAID Controller Module Installation And User Manual

<CLI> list enclosure
Current Machine Local Time: 09/15/2009 02:22:06 PM
_________________________________________________________
| Encl# | Enclosure
|_______|________________|____________|_________|________|
| 0 | Encl0
| 1 | Encl1
| 2 | Encl2
|_______|________________|____________|_________|________|
19. Enter mountstate –getobject –enclosure and press Enter to list the mount
state of the DSMs. Ensure that each DSM is online.
<CLI> mountstate -getobject -enclosure
Current Machine Local Time: 09/15/2009 02:23:46 PM
_______________________________________________________
| Enclosure# | State
|____________|_______________________|_________________|
| 0
| 1
| 2
|____________|_______________________|_________________|
20. Enter list drive and press Enter to list the drive summary for each disk
drive configured in the storage pool. Ensure that the mount state of all disk
drives inside the replacement DSM are in the online state.
<CLI> list drive
Current Machine Local Time: 09/15/2009 02:25:04 PM
__________________________________________________________________________________________
|Drive#| E:T| SerialNo | Cap | Pool
|______|____|__________|_____|___________|_____|_____|___________|____|____|_____|________|
| 0 | 1:1| 9QK0SWLM |698GB|RAID10_Pool| GRP | OK | Online
| 1 | 1:2| 9QK0V0ZB |698GB|RAID10_Pool| GRP | OK | Online
| 2 | 1:3| 9QK0HQ9V |698GB| --
| 3 | 1:4| 9QK0QCGS |698GB| --
| 4 | 1:5| 9QK0HQ74 |698GB| --
| 5 | 1:6| 9QK0QCEQ |698GB| --
| 6 | 2:1| 9QK0SWEJ |698GB|RAID10_Pool| GRP | OK | Online
| 7 | 2:2| 9QK0QCJB |698GB|RAID10_Pool| GRP | OK | Online
| 8 | 2:3| 9QK0QC50 |698GB|RAID10_Pool| GRP | OK | Online
| 9 | 2:4| 9QJ1NG5W |931GB| --
| 10 | 2:5| 9QK0SWLY |698GB| --
| 11 | 2:6| 9QK0QC85 |698GB|RAID10_Pool| GRP | OK | Online
|______|____|__________|_____|___________|_____|_____|___________|____|____|_____|________|
Drive E:T is Enclosure:Tray; tray numbers start at 1, and tray 1 is the uppermost tray.
Usage: UNA=unassigned
FOR=foreign
CBG/SCG=current/stale auto-copy-back global spare
State: OK=healthy
U=unreliable (M/P/U can be combined)
INI=initialized
IMD=incompatible metadata with this software version; either assimilate drive
UNF=firmware version unsupported for drive
What to do next
If the problem is not resolved, collect the logs and contact IBM.

Removing and reinserting an active controller

You can resolve some software problems associated with an IBM BladeCenter S
SAS RAID Controller Module by removing and reinserting the same RAID
Controller without significant interruption to the server.
| Type | Version | Status |
| Controller | 0107
| DSM | 1.06
| DSM | 1.08
| Type
| Online | Controller
| Online | DSM
| Online | DSM
GRP/SGR=current/stale group member
GLS/SGS=current/stale global spare
M=missing
UNS=unsupported (non-IBM) drive PM=path missing
or update controller firmware.
| Good |
| Good |
| Good |
|
|
|
|
|Usage|State|Mount State|Ctl0|Ctl1| RPM |FW level|
| GLS | OK | Online
| UNA | OK | Online
| UNA | OK | Online
| UNA | OK | Online
| UNA | OK | Online
| UNA | OK | Online
P=PFA predicted failure
Chapter 11. Troubleshooting and support
| 1 | 1 | 7200| BC1D |
| 1 | 1 | 7200| BC1D |
| 1 | 1 | 7200| BC1D |
| 1 | 1 | 7200| BC1D |
| 1 | 1 | 7200| BC1D |
| 1 | 1 | 7200| BC1D |
| 1 | 1 | 7200| BC1D |
| 1 | 1 | 7200| BC1D |
| 1 | 1 | 7200| BC1D |
| 1 | 1 | 7200| BC1D |
| 1 | 1 | 7200| BC1D |
| 1 | 1 | 7200| BC1D |
173