IBM BladeCenter S SAS RAID Controller Module Installation And User Manual page 180

5. Enter mountstate –getobject –enclosure and press Enter to list the mount
6. Enter list enclosure and press Enter to display the firmware version of the
7. Enter mountstate -setobject –dismount -enclosure 1 –okdegraded and press
8. Enter alert – get and press Enter to query the active alert list. Ensure alert
170
IBM SAS RAID Controller Module: Installation and User's Guide IBM BladeCenter S SAS RAID Controller Module
FOR=foreign
CBL/SCL=current/stale auto-copy-back local spare
GLS/SGS=current/stale global spare
CBG/SCG=current/stale auto-copy-back global spare
State: OK=healthy
U=unreliable (M/P/U can be combined)
INI=initialized UNS=unsupported (non-IBM) drive
IMD=incompatible metadata with this software version; either assimilate drive or
update controller firmware.
UNF=firmware version unsupported for drive
state of the DSM that is being replaced. Ensure that each DSM is online.
<CLI> mountstate -getobject -enclosure
Current Machine Local Time: 09/15/2009 02:08:29 PM
_______________________________________________________
| Enclosure# | State
|_____________|_______________________|_________________|
| 0 | Online
| 1 | Online
| 2 | Online
|_____________|_______________________|_________________|
DSMs. Record the firmware version of each DSM.
<CLI> list enclosure
Current Machine Local Time: 09/15/2009 02:09:06 PM
_____________________________________________________________________________
| Encl# | Enclosure
|_____________|________________|_________________|________________|___________|
| 0 | Encl0
| 1 | Encl1
| 2 | Encl2
|_____________|________________|_________________|________________|___________|
Enter to dismount the DSM that you will replace. The RAID controller
prepares the DSM for service by dismounting the DSM and the disk drives
inside the DSM.
<CLI> mountstate -setobject -dismount -enclosure 1 -okdegraded
Current Machine Local Time: 09/15/2009 02:16:00 PM
Set Enclosure MountState successful
2000 was generated for the DSM that was dismounted, and ensure alert 2300
was generated for each disk drive in the DSM that was dismounted.
<CLI> alert -get
Current Machine Local Time: 09/15/2009 02:16:27 PM
Existing Alerts :
_________________________________________________________________________________________
|AlertCode| Id | Time
|=========================================================================================|
| 2000 | 21 | 20090915141600 | 0
|-----------------------------------------------------------------------------------------|
| Msg: Dismounted drive enclosure 1 ready to remove
|=========================================================================================|
| 2300 | 38 | 20090915141523 | 1
|-----------------------------------------------------------------------------------------|
| Msg: Drive 01:01 ready for removal
|=========================================================================================|
| 2300 | 40 | 20090915141523 | 1
|-----------------------------------------------------------------------------------------|
| Msg: Drive 01:02 ready for removal
|=========================================================================================|
| 2300 | 39 | 20090915141523 | 1
LCS/SLS=current/stale local spare
M=missing P=PFA predicted failure
| Type
| Controller
| DSM
| DSM
| Type | Version
| Controller | 0107
| DSM | 1.08
| DSM | 1.08
| SlotID | Severity |WWN
| Info
| Info
| Info
| Info
PM=path missing
|
|
|
|
| Status
| Good
| Good
| Good
| Ackable | MaskState|
|5005076b0741417f| 0
|5005076b0741417f| 0
|5005076b0741417f| 0
|5005076b0741417f| 0
|
|
|
|
| Unmasked |
|
| Unmasked |
|
| Unmasked |
|
| Unmasked |