Table of Contents
Advertisement
detail volume verbose
The detail volume verbose command creates output detailing information about
all of the Logical Unit Numbers (LUNs). A LUN is a number assigned to a logical
unit.
Command arguments:
<CLI> detail volume verbose
Example:
<CLI> detail volume verbose
______________________________________________________________________
|
Name
|__________________|________|_________________|______|_______|________|
|
pool1:vol1|
|__________________|________|_________________|______|_______|________|
list controller
The list controller command creates output providing summary information
about each controller. The status of a controller is the actual running state of the
controller.
Command arguments:
<CLI> list controller
____________________________________________________________________
|
Ctlr#
|_____________|________________|_________________|_________|_________|
|
0 |
|
1 |
|_____________|________________|_________________|_________|_________|
Examples:
<CLI> list controller
_____________________________________________________________________
|
Ctlr#
|_____________|________________|_________________|_________|_________|
|
0 |
|
1 |
|_____________|________________|_________________|_________|_________|
|RaidType| HostWWN
0|
784875485454|
|
Controller
|
Status
Ctrl0|
Ctrl1|
|
Controller
|
Status
Ctrl0|
Ctrl1|
Chapter 8. Using the RAID Controller command line interface
| LUN | Size | Status |
3|
4GB| Viable|
| Ports | LUNs
MASTERBOUND|
1|
SLAVEBOUND|
1|
| Ports | LUNs
STARTING|
1|
SHUTDOWN|
1|
|
1|
1|
|
1|
1|
55
Advertisement
Table of Contents
Troubleshooting
Need help?
Do you have a question about the BladeCenter S SAS RAID Controller Module and is the answer not in the manual?
Questions and answers