IBM BladeCenter S SAS RAID Controller Module Installation And User Manual page 36

5. At the <CLI> prompt, enter alert –get and press Enter. Verify the
6. At the <CLI> prompt, enter list controller and press Enter. Verify the
7. At the <CLI> prompt, enter alert -get and press Enter to query the active
8. At the <CLI> prompt, enter host –add <WWN> and press Enter to add the host
9. At the <CLI> prompt, enter host –get and press Enter to verify the new host
26
IBM SAS RAID Controller Module: Installation and User's Guide IBM BladeCenter S SAS RAID Controller Module
configuration changed from a single to dual controller by querying the active
alert list for alert 706. Alert 706 is automatically cleared from the active alert
list after two minutes.
<CLI> alert -get
Existing Alerts :
__________________________________________________________________________________________
|AlertCode| Id | Time
|==========================================================================================|
| 706 | 61| 20100219232029 |
|------------------------------------------------------------------------------------------|
| Msg: Controller changed from Single to Dual Controller Mode (SCFG set to 2)
|==========================================================================================|
controllers are operating in a dual primary-secondary configuration .
<CLI> list controller
_______________________________________________________________________
| Ctlr# | Controller
|_____________|________________|____________________|_________|_________|
| 0 |
| 1 |
|_____________|________________|____________________|_________|_________|
alert list for alert 5600. Record the host port WWN to create host-LUN
mappings.
<CLI> alert -get
Current Machine Local Time: 02/19/2010 11:20:36 PM
Existing Alerts :
__________________________________________________________________________________________
|AlertCode| Id | Time
|==========================================================================================|
| 5600 | 9 | 20100219162030 |
|------------------------------------------------------------------------------------------|
| Msg: Illegal host 0x500062b00007e569 access attempted
|==========================================================================================|
WWN to the list of host.
<CLI> host -add 500062b00007e569
Host added with WWN 500062b00007e569 and Name CliHost1
was added to the list of host servers.
<CLI> host -get
HostWWN 500062b00007e568, HostName Blade_Bay_1 :
LUNs Mapped :
___________________________________________________________
| LUN | Permission
|_________|_____________________|___________________________|
| 0| ACCESS_READWRITE|
| 4| ACCESS_READWRITE|
| 3| ACCESS_READWRITE|
| 2| ACCESS_READWRITE|
| 1| ACCESS_READWRITE|
| 5| ACCESS_READWRITE|
| 6| ACCESS_READWRITE|
| 7| ACCESS_READWRITE|
| 8| ACCESS_READWRITE|
| SlotID | Severity |
0 | Info | 5005076b07441aff |
| Status
Ctlr0| PRIMARY|
Ctlr1| SECONDARY|
| SlotID | Severity |
1 | Info | 5005076b07441aff |
| Volume
Raid10_Pool:r10_vol_1|
Raid10_Pool:r10_vol_10|
Raid10_Pool:r10_vol_4|
Raid10_Pool:r10_vol_3|
Raid10_Pool:r10_vol_2|
Raid10_Pool:r10_vol_9|
Raid10_Pool:r10_vol_8|
Raid10_Pool:r10_vol_7|
Raid10_Pool:r10_vol_6|
WWN | Ackable |MaskState|
| Ports | LUNs |
1| 10|
1| 10|
WWN | Ackable |MaskState|
|
1 | Masked|
|
1 | Masked |
|