List Drive - IBM BladeCenter S SAS RAID Controller Module Installation And User Manual

list drive

The list drive command creates output providing summary information about
each drive.
The drive bay number is E:T. E:T stands for [Enclosure]:[Tray], where E is the
enclosure number and T is the position of the hard drive. These positions/locations
begin with 1 and 1 is the uppermost drive.
The usage definitions are:
v UNA - UnAssigned
v GRP/SGR - Current/Stale Group Member
v FOR - Foreign
v GLS/SGS - Current/Stale Global Spare
v NQ - Non-qualified
v LCS/SLS - Current/Stale Local Spare
v CBL/SCL - Current/Stale Auto-copy-back Local Spare
v CBG/SCG - Current/Stale Auto-copy-back Global Spare
The state definitions are:
v OK - Healthy
v M - Missing
v P - Predicted Failure (PFA)
v U - Unreliable
v PM - Path Missing
v UP - UnReliable PFA
v MP - Missing PFA
v MUP - Missing UnReliable PFA
v MU - Missing UnReliable
v INI - Initialized
v UNS - Unsupported (non-IBM device).
v PM - Path Missing The drive is OK, but one or more paths are not usable.
v IMD - Incompatible metadata The metadata on the drive is incompatible with
v UNF - Unsupported drive firmware version
Command arguments:
<CLI> list drive
Example:
<CLI> list drive
________________________________________________________________________________________________
|Drive# | E:T | SerialNo
|_______|______|______________|_______|______|_______|_______|_____________|______|______|______|
56
IBM SAS RAID Controller Module: Installation and User's Guide IBM BladeCenter S SAS RAID Controller Module
Note: M P U states can be combined.
the firmware version. Assimilate the drive or upgrade the firmware.
Important: Drive assimilation a destructive procedure causing complete data
loss. Use this command only if your intention is to irrevocably erase all disk
data.
| Cap | Pool | Usage | State | Mount State | Ctl1 | Ctl2 | RPM |