IBM BladeCenter S SAS RAID Controller Module Installation And User Manual page 159

0703 Controller identity updated
Explanation: Other controller and backplane WWNs match each other, but the WWN of this controller does not
match them.
System action: By default, the SAS RAID Module system information indicator is not turned on and the operator is
not notified of this alert by e-mail. Alert clears automatically.
Operator response: None.
0704 Survivor controller rebind complete - Controller redundancy restored
Explanation: Rebind sequence complete.
System action: By default, the SAS RAID Module system information indicator is not turned on and the operator is
notified of this alert by e-mail. Alert clears automatically after 120 seconds.
Operator response: Acknowledge to clear the alert immediately.
0705 Controller configuration script script_name execution started.
Explanation: Configuration script started.
System action: By default, the SAS RAID Module system information indicator is not turned on and the operator is
not notified of this alert by e-mail. Alert clears automatically after 120 seconds.
Operator response: Acknowledge to clear the alert immediately.
5700 Controller configuration script script_name execution failed
Explanation: Configuration script execution failed.
System action: By default, the SAS RAID Module system information indicator is not turned on and the operator is
not notified of this alert by e-mail.
Operator response: Acknowledge to clear the alert immediately. Examine log files to identify errors in the
configuration script.
5701 Foreign drive drive_ID detected and must be assimilated to become usable
Explanation: Discovered drive contains metadata from an incompatible RAID controller product.
System action: By default, the SAS RAID Module system information indicator is turned on and the operator is not
notified of this alert by e-mail. Alert clears when the drive is assimilated or removed.
Operator response: Assimilate or remove the incompatible drive.
This alert can be masked so that it does not trigger the SAS RAID Module system information indicator.
Chapter 11. Troubleshooting and support
0703 • 5701
149