Display Commands; Detail Controller - IBM BladeCenter S SAS RAID Controller Module Installation And User Manual

Display commands

Use the SAS Switch command line interface for the RAID controller to perform
administrative tasks for the device. This topic details the commands that you can
use to display information.

detail controller

The detail controller command creates output detailing information about the
controller selected.
Command arguments:
<CLI> detail controller –ctlr [0|1]
Where:
v [0|1] - Allows selection of the controller.
Example:
<CLI>detail controller –ctlr [0|1]
Current Machine Local Time: 07/26/2012 00:35:24 AM
50
IBM SAS RAID Controller Module: Installation and User's Guide IBM BladeCenter S SAS RAID Controller Module
Controller Information :
UltraSlice Version
Software version
Uboot Version
OS version
SES version
BMC version
FPGA version
CPLD version
SAS switch version
Chassis Serial Number
WWN
Chassis Machine Type/Model
SAS RAID Controller Module Part Number
SAS RAID Controller Module FRU Part Number
SAS RAID Controller Module Serial Number
Machine Signature
SAS RAID Controller Module Location
Manufacturer ID
SAS RAID Controller Module Hardware Revision ID
SAS RAID Controller Module Hardware Product ID
MAC Address (upto 8)
Target port WWN
Target port protocol
Target port speed
Current Status
System Hardware Configuration Mode
BBU State
BBU Fault Code
BBU Part Number
BBU Serial Number
BBU FRU Number
BBU Firmware Revision
BBU Expiration Date
Charging state information
BBU Charging
BBU Capacity (Hours)
: ALC3300
: H-2.1.2.4
: H-1.1.4.6
: H-2.4.20.12
: 0107
: S0BT10A 0121 02/08/2010
: 01.07
: S0CP00A C00A 01/01/2000
: S0SW01D R107 12/17/2009
: KQWZZN1
: 5005076b07402cff
: 8886AC1
: 43W3605
: 43W3630
: YK101279B016
: IO Bay 3
: IBM
: 2
: 00a5
: 00:1A:64:9E:00:61
: 5005076b07402ca0
: SAS
: 3Gbps
: SECONDARY
: Dual
: 1 (Working)
: 0 (None)
: 45W4439
: YK10MY2810D2
: 45W5002
: 58.0
: Sat Jul 23 12:00:00 2016
: False
: 72+