Workflow Notes; Documentation Notes; Important Notes - IBM BladeCenter S SAS RAID Controller Module Installation And User Manual

Workflow notes

There are several different tools and utilities that impact the way you begin using
your IBM BladeCenter S SAS RAID Controller Module.
For example, if you are using the IBM Storage Configuration Manager application
to configure your storage and data redundancies and maintain your firmware, the
steps you take to accomplish this are more automated than if you are using the
RAID Controller command line interface and, or the SAS RAID Controller
Firmware Update Package to do these things. However, despite the manner in
which you choose to accomplish your system storage configurations and
maintenance, the IBM BladeCenter S SAS RAID Controller Module enables you
configure your integrated storage solutions by performing the following:
v Create storage pools
v Define volumes for those pools
v Receive Logical Unit Numbers (LUNs) for those volumes
v Map those LUNs to hosts (servers) contained in the IBM BladeCenter S chassis.
Important: Before you begin the process of storage configuration, use the RAID
Controller command line interface to set up your email to receive system alerts
and log output.

Documentation notes

4
IBM SAS RAID Controller Module: Installation and User's Guide IBM BladeCenter S SAS RAID Controller Module
Table 2. Important notes
Summary
Throughout this document, the user name is also known as the login name, user identifier,
or user ID for logging into one or more of the following interfaces or programs:
v Telnet interface
v Web browser interface
v Advanced management module Web interface
v IBM Storage Configuration Manager Web interface
Note: The IBM Storage Configuration Manager has two login screens: One to the server
and the other to the RAID Controller.
v RAID Controller command line interface
v SAS Switch command line interface
v SAS Switch Web interface
v
Requirement: Install two SAS RAID Modules in an IBM BladeCenter S chassis.
Requirement: To use the SAS RAID Modules, Battery Backup Units must be installed in
bay 1 and bay 2 of the media tray.
You can obtain up-to-date information about the SAS RAID Modules and other IBM
products at http://www.ibm.com/systems/support/