Battery - IBM BladeCenter S SAS RAID Controller Module Installation And User Manual

-id : id of the alert message to be taken action on .
-ctlr : slotID of the controller where you want the action to be taken place on an alert
[-create] : This option can be used to create a generic alert with the alert code specified
[-clear] : This option can be used to clear a generic alert with the alert code specified
Example:
<CLI> alert -get
Current Machine Local Time: 04/02/2009 11:24:34 AM
Existing Alerts :
__________________________________________________________________________________________
|AlertCode| Id |
|==========================================================================================|
| 5600 | 2 |20090325124508|
|------------------------------------------------------------------------------------------|
| Msg: Illegal host 0x500062b00007ccc0 access attempted
|==========================================================================================|

battery

Use this command to manage the Battery Backup Units.
Command arguments:
<CLI> battery -ctlr [0|1] -get
Where:
v [0|1] - Allows you to select controller 0 or 1.
When you issue this command with the -get option, the current status of the
battery is displayed:
Example:
<CLI> battery -ctlr 0 -get
Controller 0
Basic battery type and status
BBU State
BBU Fault Code
Part Number
Serial Number
FRU Number
FirmwareRev
Expiration Date
Charging state information
Charging
Capacity (Hours)
<CLI>
message.
by '-code' option. The valid range for the alert code is between 10000-19999.
The description and details of these codes can be found in RAS user guide.
by '-code' option. The valid range for the alert code is between 10000-19999.
Time |SlotID| Severity |
0|
: 1 (Working)
: 0 (None)
: 45W4439
: YK10MY2810D2
: 45W5002
: 58.0
: Sat Jul 23 12:00:00 2016
: False
: 72+
Chapter 8. Using the RAID Controller command line interface
WWN | Ackable | MaskState |
Info |5005076b074059ff| 1 | Masked |
|
59