List Volume; System Control And Configuration Commands; Alert - IBM BladeCenter S SAS RAID Controller Module Installation And User Manual

list volume

The list volume command creates output providing summary information about
all volumes. The volume name displays as poolname:volumename.
The possible states of a volume are:
v Viable
v Degraded
v InTransition
v Inited
An Inited state indicates that the volume has been initialized.
Command arguments:
<CLI> list volume
Example:
<CLI> list volume
| vol# |
|______|___________________________|_________|___________|_______________|
|
|
|
|
|
|______|___________________________|_________|___________|_______________|

System control and configuration commands

Use the RAID Controller command line interface to perform administrative tasks
for the device. This topic details commands about system control and
configuration.

alert

The alert command displays system alerts, changes the state of system alerts, and
creates a generic alert. Use the -get option to display alerts generated in the
system at any given point. To change the state of the alerts specified by the alert
code and alert id, use the -mask, -unmask, or -ack option. Use the -create option to
create a generic alert with the alert code specified by the –code option.
Note: Refer to the Troubleshooting section for description and details on the alerts
and codes.
Command arguments:
<CLI> alert [ -get | -mask | -unmask | -ack | -savehistory | -create | -clear]
-help option
Usage
[-get]
[-mask]
[-savehistory] : Saves alert history into a file.
-code
58
IBM SAS RAID Controller Module: Installation and User's Guide IBM BladeCenter S SAS RAID Controller Module
________________________________________________________________________
VolumeName
0|
1| Group0:vol1|
2|
3| MyData:MyVolume|
4| pl23:volume0|
: alert [ -get | [-create|-clear] -code genericAlertCode | -savehistory |
-[ mask | unmask | ack ] -code AlertCode -id Id -ctlr SlotID ]
: Displays the alerts generated in the system at any given point.
: When this command is used with mask/unmask or ack options, it can be used to
change the state of the alerts in the system specified by the alert code and
alert id.
: alert code of the alert you want to take action on.
| Cap | RaidType |
pool1:vol1| 4GB|
183GB|
ADMIN:v2| 197GB|
4GB|
44GB|
Status |
0| Viable|
5| Viable|
10| Degraded |
0| Inited|
0| InTransition|