Removing The Defective Power Distribution Board - Fujitsu PRIMERGY RX1330 M1 Upgrade And Maintenance Manual

Power supply
6.3.4.2

Removing the defective power distribution board

Ê Remove all power supply units as described in section
power supply unit" on page
Figure 36: Removing the power distribution board
Ê Disconnect the two power cables from the power distribution board (1).
Ê Remove the screw (see circle).
Ê Slide the power distribution board out of the guidings of the chassis (2) and
take it out upward (3).
106
102.
Upgrade and Maintenance Manual
"Removing a hot-plug
RX1330 M1