Installing A New Bbu - Fujitsu PRIMERGY CX250 S2 Upgrade And Maintenance Manual

6.7.3.5

Installing a new BBU

Ê Install the new BBU into the BBU holder as described in section
BBU" on page
Figure 92: Installing the BBU (B)
Ê Place the BBU on the heat sink CPU1 (1).
Ê Secure the BBU with two screws (2).
Ê Connect the BBU cable to the controller as described in section
the BBU to the controller" on page
CX250 S2
Expansion cards and battery backup units
153.
Upgrade and Maintenance Manual
161.
"Installing a
"Connecting
169