Table 1-1. Interaction Between Virtual Key Led Answer Control #1 And #2 Settings - Panasonic DBS-576 Technical Manual

Section 400-Programming

Table 1-1. Interaction between Virtual Key LED Answer Control #1 and #2 settings

Introduction
Answer Control #1
(all phones)
FF1 0 01 0007 Hold (0/1) Hold
0=free-up FF-key (unlit)
0
1=stay lit (busy)
System
Configuration
0
FF1
System
0
FF2
Trunks
1
FF3
Extensions
1
NOTE: If the phone doesn't have an MCO key for the trunk, the call will not "appear" anywhere on the phone when it
FF4
is moved from the Virtual Port FF-key; but it will remain a normal call (can be put on hold, transferred, etc.).
FF-/Soft Keys
FF5
Virtual Key LED: Answer Control #2
Groups
(all CPCs) - Version 1.0 or higher
Set whether the FF-key line appearance for a Virtual Port will extinguish or
stay lit on the phone that answers an incoming call to the Virtual Port.
FF6
TRS/ARS
FF7
Applications
FF8
Notes:
Maintenance
See Notes, previous page.
This setting will apply only if Virtual Key LED: Answer Control #1 is set to "0=Free-up" (default).
Related Programming:
Appendix A
See Related Programming, previous page.
Appendix B
576-13-400
Answer Control #2
(answering phone only)
FF1 0 01 0008 Hold (0/1) Hold
0=stay lit (busy)
1=free-up FF-key (unlit)
0
1
0
1
FF1 0 01 0008 Hold (0 or 1) Hold
DBS 576 (USA) issued 05/20/98
FF1: System Programming
Result:
An incoming call to the Virtual Port will ring on all
phones with a Virtual FF-key line appearance for it.
When the call is answered ...
... the FF-key will stay lit on the phone that
answered the call. The Virtual Port's FF-keys on all
other phones will extinguish (the call appearance
moves to the MCO key to which the trunk belongs).
These Virtual FF-keys are now available for the
next incoming call to the Virtual Port.
(default) ... the Virtual Port's FF-keys on all
phones will extinguish (the call appearance moves
to the MCO key to which the trunk belongs). These
Virtual FF-keys are now available for the next
incoming call to the Virtual Port.
... all FF-keys for the Virtual Port will stay lit.
... all FF-keys for the Virtual Port will stay lit.
(same as 1 - 0 above, because if Answer Control
#1 is set to "1=stay lit," negates any Answer Control
#2 setting)
0=Stay lit (busy).
1=Free-up FF-key (extinguish). (default)
Introduction
0
Configuration
FF1
System
FF2
Trunks
FF3
Extensions
FF4
FF-/Soft Keys
FF5

Groups
&-, #)%
FF6
TRS/ARS
FF7
Applications
FF8
Maintenance
Appendix A
Appendix B
Page 1-13
System