Ff8 0 05: Line Control - Panasonic DBS-576 Technical Manual

Section 400-Programming
Introduction

FF8 0 05: Line Control

0
System Line Lockout
Configuration
(all CPCs) - Version 1.0 or higher
Enable/Disable the line. You can use pre-lockout to make the line idle (the
system will lockout the line).
FF1
System
FF2
Trunks
FF3
Extensions
Notes:
If the line is busy when you lockout the trunk, "2" (meaning "wait for Trunk close") will appear on the
FF4
display. When the line becomes idle, the display will change to "1" ("Trunk close"). Trunk Lockout
status is not indicated on FF-key line appearances.
FF-/Soft Keys
Related Programming:
FF5
Groups
FF6
ISDN/T1 Error Information Control
TRS/ARS
(all CPCs) - Version 1.0 or higher
View or clear ISDN/T1 error information.
FF7
Applications
FF8
Maintenance
Notes:
Appendix A
Appendix B
576-13-400
FF8 0 05 0 BSSCC
BSSCC: Line Position
B=Cabinet no. 1-6
SS=Slot no. 01-12
CC=Channel no. 01-24 or
Trunk No. 01-08
FF8 0 05 1
BSSCC: Channel Position
B=Cabinet no. 1-6
SS=Slot no. 01-12
C=1-4 (BRI) or
1 (PRI//T1)
DBS 576 (USA) issued 05/20/98
Hold
IF DISPLAYED:
0=Normal
1=Trunk close
2=wait for Trunk close
BSSC Hold (0 or 1)
FF8: Maintenance
5 -
(0 or 1) Hold
IF INPUT:
0=Release
1=Lockout
5 * !!,
Hold
0=Clear error information
1=Read error information
default: [no assignment]
Introduction
0
System
Configuration
FF1
System
FF2
Trunks
FF3
Extensions
FF4
FF-/Soft Keys
FF5
Groups
FF6
TRS/ARS
FF7
Applications
FF8
Maintenance
Appendix A
Appendix B
Page 8-25