Ff1 0 09: Smdr Output Format - Panasonic DBS-576 Technical Manual

Section 400-Programming
Introduction

FF1 0 09: SMDR Output Format

0
SMDR Output Format
System
Configuration
(all CPCs) - Version 1.0 or higher
Select the format (if any) for SMDR data output.
FF1
System
FF2
Trunks
Notes:
FF3
Format #1 (default) contains the following information:
Extensions
Call Condition Code (e.g., "I" for incoming call; "S" for DISA incoming call; "s" for DISA
outgoing call; etc.)
Call Start Time
FF4
Call Duration Time
FF-/Soft Keys
CO User No. (extension no. or trunk no.)
CO Line No. (when the line is disconnected while the call is on hold)
Dialed No.
FF5
Accounting Code
Groups
Verified Account Code
Format #2 includes all the information in Format #1, plus the following:
FF6
Caller Data
TRS/ARS
ISDN Charge Data
For examples of Formats #1 and #2, see Section 300-Installation or Section 700-Feature Operation.
FF7
Set this address to "Format #2" for the Caller ID Log Outdialing feature.
Applications
Related Programming:
SMDR Data to Serial Port (pg. 1-88)
FF8
Caller ID Log Outgoing Add Digits (pg. 1-112)
Maintenance
Appendix A
Appendix B
576-13-400
FF1 0 09 0001 Hold (0-2) Hold
FF1 0 06 0001 Hold (0-2) Hold
DBS 576 (USA) issued 05/20/98
0=no SMDR output
1=Format #1 (default)
2=Format #2
FF1 0 25 0001 Hold (up to 4 char.) Hold
FF1: System Programming
2  "!
Page 1-93
Introduction
0
System
Configuration
FF1
System
FF2
Trunks
FF3
Extensions
FF4
FF-/Soft Keys
FF5
Groups
FF6
TRS/ARS
FF7
Applications
FF8
Maintenance
Appendix A
Appendix B