Panasonic DBS-576 Technical Manual page 482

FF6: TRS/ARS
Introduction
0
System
Configuration
FF1
System
FF2
Trunks
FF3
Extensions
Before programming TRS/ARS in FF6, it is important to set up trunk groups, assign
them to the MCO-1 access code in each Tenant Group, and assign extensions to the
Tenant Groups:
FF4
FF-/Soft Keys
FF5
Groups
FF6
TRS/ARS
FF7
Applications
FF8
Maintenance
Groups of extensions can be limited to MCO-1 access only, to get an outside line:
Appendix A
Appendix B
Page 6-4
for S-Point ISDN Extensions:
TRS Class Assignment (Day) (pg. 3-37)
TRS Class Assignment (Night) (pg. 3-38)
for analog CO trunks:
TRS Class Assignment (Day) (pg. 2-34)
TRS Class Assignment (Night) (pg. 2-35)
for analog E&M tie-trunks:
TRS Class Assignment (Day) (pg. 2-57)
TRS Class Assignment (Night) (pg. 2-57)
for ISDN trunks:
TRS Class Assignment (Day) (pg. 2-81)
TRS Class Assignment (Night) (pg. 2-82)
for T1 CO trunks:
TRS Class Assignment (Day) (pg. 2-113)
TRS Class Assignment (Night) (pg. 2-114)
for T1 E&M tie-trunks:
TRS Class Assignment (Day) (pg. 2-136)
TRS Class Assignment (Night) (pg. 2-136)
MCO-Outbound Trunk Group Members (pg. 5-18)
FF5 2 (01-99) (002-577) Hold (1-576) Hold
Tenant Group MCO Access: Outbound Trunk Groups (pg. 1-164)
FF1 3 01 (0001-0360) Hold (0-99 or 0-72) Hold
defaults: Tenant Group #1/MCO-1=Trunk Group 1
Tenant Group #2/MCO-1=Trunk Group 2
Tenant Group #3/MCO-1=Trunk Group 3
...
Tenant Group #72/MCO-1=Trunk Group 72
Advanced Routing: Outbound Trunk Group Chains (pg. 1-165)
FF1 3 02 (0001-0360) Hold (0-99) Hold
for Digital Keyphones and SLTs:
Tenant Group Assignment (pg. 3-24)
FF3 0 BSSC 05 Hold (1-72) Hold
for S-Point ISDN Extensions:
Tenant Group Assignment (pg. 3-36)
FF3 1 BSSC 04 Hold (1-72) Hold
for Virtual Ports:
Tenant Group Assignment (pg. 3-43)
FF3 2 (001-576) 02 Hold (1-72) Hold
Extension COS: Forced ARS (pg. 1-68)
FF1 0 03 (00-15) 42 Hold (0 or 1) Hold
Extension COS Assignment (pg. 3-26)
FF3 0 BSSC 07 Hold (1-16) Hold
DBS 576 (USA) issued 05/20/98
Section 400-Programming
FF3 1 BSSC 05 0 Hold (1-50) Hold
FF3 1 BSSC 05 1 Hold (1-50) Hold
FF2 0 BSSC 06 0 Hold (1-50) Hold
FF2 0 BSSC 06 1 Hold (1-50) Hold
FF2 0 BSSC 06 0 Hold (1-50) Hold
FF2 0 BSSC 06 1 Hold (1-50) Hold
FF2 1 BSSC 07 0 Hold (1-50) Hold
FF2 1 BSSC 07 1 Hold (1-50) Hold
FF2 2 BSSCC 07 0 Hold (1-50) Hold
FF2 2 BSSCC 07 1 Hold (1-50) Hold
FF2 2 BSSCC 07 0 Hold (1-50) Hold
FF2 2 BSSCC 07 1 Hold (1-50) Hold
(default: no assignment)
(default: 0=no assignment)
(default: Tenant Group #1)
(default: Tenant Group #1)
(default: Tenant Group #1)
(default: 0=Not Forced. Set it to 1=Forced)
(default: Extension COS #1)
Introduction
0
System
Configuration
FF1
System
FF2
Trunks
FF3
Extensions
FF4
FF-/Soft Keys
FF5
Groups
FF6
TRS/ARS
FF7
Applications
FF8
Maintenance
Appendix A
Appendix B
576-13-400