Ff4 0: Ff-Keys On Digital Keyphones, Slts, And Em/24 Units - Panasonic DBS-576 Technical Manual

Section 400-Programming
Introduction
FF4 0: FF-Keys on Digital Keyphones,
0
System
Notes:
Configuration
The extension's Phone Type must be set to "1" (for Digital Keyphone or SLT - default) or "2"
(for EM/24). See Phone Type (pg. 3-3): FF3 0 BSSC 00 Hold (1-3) Hold.
FF1
Although SLTs don't have Flexible Function Keys, the following addresses can be used for
System
assigning trunk or Virtual Port ringing to them.
There are 32 assignments for FF-keys in the following FF4 0 addresses. The largest phone
programmed by this address, the 34-Button Small-Display phone (see illustration, next page)
FF2
has 24 FF-keys. The remaining 8 assignments for this phone can be used for Virtual Port
ringing. Virtual Ports can also be assigned on other phones using the extra FF-key
Trunks
assignments.
FF3
FF-Key Feature Assignment (Digital Keyphones,
Extensions
SLTs, EM24s)
(all CPCs) - Version 1.0 or higher
Assign Feature Codes to the FF-keys on digital keyphones, SLTs, or EM/24 units.
FF4
FF-/Soft Keys
FF4 0 BSSC 0 (01-32) Hold FLASH
FF5
BSSC: Extension Port
Groups
B=Cabinet no. 1-6
SS=Card Slot no. 01-12
C=Circuit no. 1-8
FF6
TRS/ARS
Notes:
To copy FF-key and ring assignments from one phone to another,
FF7
use the COPY and PASTE commands (soft keys 6 and 7) as follows:
Applications
(1) Enter the first part of the above address without specifying an
FF-key number to program:
FF8
(for
BSSC,
settings from)
Maintenance
(2) Press the COPY soft key. The display won't change, but the
phone will beep once to indicate it has recognized the copy
command.
(3) Use the BLK-DOWN or BLK_UP soft key to toggle to the next
Appendix A
extension you want to copy to. The display will change to the
new BSSC port position and extension number assignment.
Appendix B
576-13-400
SLTs, and EM/24 Units
01=FF1 key
02=FF2 key
03=FF3 key
...
32=FF32 key
FF4 0 BSSC 0 Hold
enter the port position of the phone you want to copy
DBS 576 (USA) issued 05/20/98
FF4: FF-Key/Soft Key Feature Assignment
(to clear current
feature assignment)
(Code) Hold
Feature Code Assignment (see pg. 4-2)
initial default: [no assignment]
See figures starting on pg. 4-8 for
FF-key numbering on phones.
BSSC-0**
FF-Key #











 


 












Introduction
0
Configuration
FF1
System
FF2
Trunks
FF3
$ 
"" /
Extensions
FF4
FF-/Soft Keys
FF5
Groups
FF6
TRS/ARS
FF7
Applications
100





FF8



Maintenance


    









Appendix A



DEF
ABC
Appendix B
Page 4-7
System