Panasonic DBS-576 Technical Manual page 400

FF3: Extension Programming
Introduction
Large-LCD Fixed Menu Display During Idle
(all CPCs) - Version 1.0 or higher
Set whether a Large-LCD phone's display will return to the "Idle" Fixed
0
Feature Code menu screen when the phone returns to idle.
System
Configuration
FF1
System
FF2
Trunks
Notes:
This address applies only to handset off-hook calls (doesn't apply to ON/OFF key).
FF3
If "0" (do not allow return to "Idle" menu) is selected, the first page of the directory accessed will
appear when the user hangs up.
Extensions
If "1" (allow return to "Idle" menu) is selected, the phone will return to the Fixed Idle menu each time
the user hangs up. To select a different menu for idle, display the desired menu during idle, then press:
FF4
ON/OFF PROG ## ON/OFF
FF-/Soft Keys
Related Programming:
FF5
Groups
Trunk Key Operation: Direct Calls
FF6
(all CPCs) - Version 1.0 or higher
TRS/ARS
Enable/Disable the extension's ability to seize a trunk by pressing the trunk key
for it while the phone is ringing for an incoming call.
FF7
Applications
FF8
Maintenance
Notes:
The incoming call can be an intercom call, DID, DISA, DIL, etc.
Appendix A
Appendix B
Page 3-14
FF3 0 BSSC 04 11 Hold
BSSC: Extension Port
B=Cabinet no. 1-6
SS=Slot no. 01-12
C=Circuit no. 1-8
FF3 0 BSSC 04 12 Hold
BSSC: Extension Port
B=Cabinet no. 1-6
SS=Slot no. 01-12
C=Circuit no. 1-8
DBS 576 (USA) issued 05/20/98
(0 or 1) Hold
0=Do not allow return to "Idle" Fixed menu.
1=Allow return to "Idle" Fixed menu. (default)
(0 or 1) Hold
0=Seize trunk.
1=Ignore key press. (default)
Section 400-Programming
$ 
, ' 
$ 
# 3 #$% 
576-13-400
Introduction
0
System
Configuration
FF1
System
FF2
Trunks
FF3
Extensions
FF4
FF-/Soft Keys
FF5
Groups
FF6
TRS/ARS
FF7
Applications
FF8
Maintenance
Appendix A
Appendix B