Panasonic DBS-576 Technical Manual page 99

Section 400-Programming
Notes:
Introduction
Tone Calling: The called extension answers by picking up the handset or pressing ON/OFF.
Voice Calling: The called extension can hear the caller on speaker; both parties can begin talking
immediately (no action necessary).
0
System
The end-user can toggle between Tone and Voice by dialing "1" during the call.
Configuration
If this address is set to "Voice calling," but Extension COS: Voice Call Send is disabled, the phone will
automatically switch to Tone calling when the user places an intercom call.
FF1
If this address is set to "Tone calling," the Extension COS: Voice Call Send setting has no effect.
System
(all CPCs - Version 1.3 and higher)
(busy) extension simply by dialing "4" (don't need to switch to Tone calling first). The Message-
Waiting will be cancelled by either extension placing a second Voice call to the other.
FF2
Trunks
Related Programming:
Extension COS: Voice Call Send (pg. 1-63)
Extension COS: Voice Call Receive (pg. 1-64)
FF3
Extension COS Assignment (pg. 3-26) for digital keyphones and SLTs
Extensions
Extension COS Assignment (pg. 3-38) for S-point ISDN extension ports
Extension COS Assignment (pg. 3-43) for Virtual Ports
Extension COS Assignment (pg. 3-46) for RAI Ports
FF4
FF-/Soft Keys
Extension COS: Onhook Transfer at Ringback
FF5
(all CPCs) - Version 1.0 or higher
Groups
Allow/Restrict the ability of extensions in this Class of Service (COS) to
perform Onhook Transfer during ringback tone, before the called party answers.
FF6
TRS/ARS
FF7
Applications
FF8
Maintenance
Notes:
Appendix A
Onhook Transfer at Ringback: (also called "Blind Transfer") Put call on hold, dial the extension to
transfer to, and hang up before the called party answers.
Appendix B
576-13-400
During a Voice call, a Message-Waiting signal can be sent to the called
FF1 0 03 (00-15) 02 Hold (0 or 1) Hold
Extension COS Nos. 1-16
00=COS 1 08=COS 9
01=COS 2 09=COS 10
02=COS 3 10=COS 11
03=COS 4 11=COS 12
04=COS 5 12=COS 13
05=COS 6 13=COS 14
06=COS 7 14=COS 15 (for VM)
07=COS 8 15=COS 16 (for Attendant)
DBS 576 (USA) issued 05/20/98
FF1 0 03 (00-15) 36 Hold (0 or 1) Hold
FF1 0 03 (00-15) 37 Hold (0 or 1) Hold
FF3 2 (001-576) 03 Hold (1-16) Hold
FF3 3 02 Hold (1-16) Hold
0=Allow Onhook Transfer at ringback.
(default)
1=Do not allow Onhook Transfer at ringback.
FF1: System Programming
FF3 0 BSSC 07 Hold (1-16) Hold
FF3 1 BSSC 06 Hold (1-16) Hold
))#) .3 7%
<))=#   >
Page 1-37
Introduction
0
System
Configuration
FF1
System
FF2
Trunks
FF3
Extensions
FF4
FF-/Soft Keys
FF5
Groups
FF6
TRS/ARS
FF7
Applications
FF8
Maintenance
Appendix A
Appendix B