Panasonic DBS-576 Technical Manual page 278

FF2: Trunk Programming (Analog CO)
Notes:
(see
Introduction
Related Programming:
0
Night Ring Type
System
Configuration
(all CPCs) - Version 1.0 or higher
Set the analog CO trunk's ringing type for incoming calls during Night mode.
FF1
System
BSSC: Analog (CO) Trunk Position
FF2
B=Cabinet no. 1-6
Trunks
SS=Slot no. 01-12
C=Circuit no. 1-8
FF3
Extensions
FF4
Night Ring Destination
FF-/Soft Keys
(all CPCs) - Version 1.0 or higher
Assign a destination extension, Hunt Group, SSD code, or Attendant Hunt
Group for a "DIL" (Direct In-Line) setting in the above address.
FF5
Groups
FF6
BSSC: Analog (CO) Trunk Position
TRS/ARS
B=Cabinet no. 1-6
SS=Slot no. 01-12
C=Circuit no. 1-8
FF7
Applications
FF8
Notes:
(see
Maintenance
Related Programming:
Appendix A
Appendix B
Page 2-30
"Day1 Ring Type/Destination" - pg. 2-28
(see
"Day1 Ring Type/Destination" - pg. 2-28
FF2 0 BSSC
FF2 0 BSSC
"Day1 Ring Type/Destination" - pg. 2-28
(see "Day1 Ring Type/Destination" - pg. 2-28
DBS 576 (USA) issued 05/20/98
)
03 4 Hold (0-6) Hold
0=Multiple Incoming (default)
1=DID or DNIS
2=DISA
3=DIL to Extension
4=DIL to Hunt Group
5=DIL to SSD
6=DIL to Attendant Hunt Group
03 5 Hold (0-9999) Hold
Destination Number:
Ext. No., Virtual Ext.No., or Closed No.
(if "3=DIL to Extension")
Extension Hunt Group No. (1-72)
(if "4=DIL to Hunt Group")
SSD Code No.
(if "5=DIL to SSD")
Attendant Hunt Group Pilot No.
(if "6=DIL to Attendant")
default: [no assignment]
)
Section 400-Programming
)
$ 
)9  %6
$
) !
)
576-13-400
Introduction
0
System
Configuration
FF1
System
FF2
Trunks
FF3
Extensions
FF4
FF-/Soft Keys
FF5
Groups
FF6
TRS/ARS
FF7
Applications
FF8
Maintenance
Appendix A
Appendix B