Panasonic DBS-576 Technical Manual page 281

Section 400-Programming
Introduction
Night Delayed Ring Type
(all CPCs) - Version 1.0 or higher
Set the analog CO trunk's delayed-ringing type during Night mode.
0
NOTE: Night Ring Type (pg. 2-30) must be either "DIL" or "Multiple
System
Configuration Incoming" to set Night Delayed Ringing (DID and DISA do not apply here).
FF1
System
BSSC: Analog (CO) Trunk Position
B=Cabinet no. 1-6
SS=Slot no. 01-12
FF2
C=Circuit no. 1-8
Trunks
FF3
Extensions
Night Delayed Ring Destination
(all CPCs) - Version 1.0 or higher
Assign a destination extension, Hunt Group, SSD code, or Attendant
FF4
Hunt Group, depending on the setting in the above address.
FF-/Soft Keys
FF5
Groups
BSSC: Analog (CO) Trunk Position
B=Cabinet no. 1-6
SS=Slot no. 01-12
FF6 C=Circuit no. 1-8
TRS/ARS
FF7
Applications
Notes:
(see
FF8
Related Programming:
Maintenance
Appendix A
Appendix B
576-13-400
FF2 0 BSSC
FF2 0 BSSC
(if "1=delay-ring to Extension")
(if "2=delay-ring to Hunt Group")
(if "3=delay-ring to SSD")
(if "4=delay-ring to Attendant")
"Day1 Delayed Ring Type/Destination" - pg. 2-31
(see
"Day1 Delayed Ring Type/Destination" - pg. 2-31
DBS 576 (USA) issued 05/20/98
FF2: Trunk Programming (Analog CO)
04 4 Hold (0-4) Hold
0=Disabled; no delayed ringing (default)
1=delay-ring to Extension
2=delay-ring to Hunt Group
3=delay-ring to SSD
4=delay-ring to Attendant Hunt Group
04 5 Hold (0-9999) Hold
Destination Number:
Ext.No., Virtual Ext.No., or Closed No.
Extension Hunt Group No. (1-72)
SSD Code No.
Attendant Hunt Group Pilot No.
default: [no assignment]
)
$ 
)1%  %6
$ 
) !
)
Page 2-33
Introduction
0
System
Configuration
FF1
System
FF2
Trunks
FF3
Extensions
FF4
FF-/Soft Keys
FF5
Groups
FF6
TRS/ARS
FF7
Applications
FF8
Maintenance
Appendix A
Appendix B