Panasonic DBS-576 Technical Manual page 360

FF2: Trunk Programming (T1 CO)
Introduction
Night Delayed Ring Type
(all CPCs) - Version 1.0 or higher
Set the T1 channel's delayed-ringing type during Night mode.
0
NOTE: Night Ring Type (pg. 2-109) must be either "DIL" or "Multiple
System
Configuration
Incoming" to set Night Delayed Ringing (DID and DISA do not apply here).
FF1
System
BSSCC: T1 (CO) Channel Position
FF2
Trunks
FF3
Extensions
Night Delayed Ring Destination
(all CPCs) - Version 1.0 or higher
Assign a destination extension, Hunt Group, SSD code, or Attendant Hunt
FF4
Group, depending on the setting in the above address.
FF-/Soft Keys
FF5
Groups
BSSCC: T1 (CO) Channel Position
B=Cabinet no. 1-6
SS=Slot no. 01-12
FF6
CC=Channel no. 01-24
TRS/ARS
FF7
Notes:
(see
Applications
Related Programming:
FF8
Maintenance
Appendix A
Appendix B
Page 2-112
FF2 2 BSSCC
B=Cabinet no. 1-6
SS=Slot no. 01-12
CC=Channel no. 01-24
FF2 2 BSSCC
(if "1=delay-ring to Extension")
(if "2=delay-ring to Hunt Group")
(if "3=delay-ring to SSD")
(if "4=delay-ring to Attendant")
"Day1 Delayed Ring Type/Destination" - pg. 2-110
(see
"Day1 Delayed Ring Type/Destination" - pg. 2-110
DBS 576 (USA) issued 05/20/98
05 4 Hold (0-4) Hold
0=Disabled; no delayed ringing (default)
1=delay-ring to Extension
2=delay-ring to Hunt Group
3=delay-ring to SSD
4=delay-ring to Attendant Hunt Group
05 5 Hold (0-9999) Hold
Destination Number:
Ext.No., Virtual Ext.No., or Closed No.
Extension Hunt Group No. (1-72)
SSD Code No.
Attendant Hunt Group Pilot No.
default: [no assignment]
)
Section 400-Programming
$ 
)1%  %6
$
) !
)
576-13-400
Introduction
0
System
Configuration
FF1
System
FF2
Trunks
FF3
Extensions
FF4
FF-/Soft Keys
FF5
Groups
FF6
TRS/ARS
FF7
Applications
FF8
Maintenance
Appendix A
Appendix B