Panasonic DBS-576 Technical Manual page 262

FF2: Trunk Programming (Analog CO)
Introduction
DTMF On/Off Pattern During Talk
(all CPCs) - Version 1.0 or higher
Set the DTMF signaling pattern that will apply after an extension user connects
0
to the called party during a CO call on this trunk.
System
Configuration
FF1
System BSSC: Analog (CO) Trunk Position
FF2
Trunks
Notes:
This address applies to the entry of account codes, selection of voice menu options, etc. during a call.
FF3 Up to 3 different DTMF patterns can be defined in FF1 1 01 (0016-0019).
Extensions
(all CPCs - Version 1.3 and higher)
signals will be sent to the other party (mainly for Voice Mail connection).
FF4
Related Programming:
FF-/Soft Keys
DTMF ON: Pattern #1 (pg. 1-123)
DTMF OFF: Pattern #1 (pg. 1-124)
DTMF ON/OFF: Pattern #2 (pg. 1-125)
DTMF ON/OFF: Pattern #3 (pg. 1-126)
FF5
Groups
DTMF On/Off Pattern for Outgoing Dialing
FF6
(all CPCs) - Version 1.0 or higher
TRS/ARS
Set the DTMF signaling pattern that will apply to the dialing of outbound phone
numbers (DTMF sent to CO) on this trunk.
FF7
Applications
BSSC: Analog (CO) Trunk Position
FF8
Maintenance
Notes:
Up to 3 different DTMF patterns can be defined in FF1 1 01 (0016-0019).
Appendix A
Appendix B
Page 2-14
FF2 0 BSSC
B=Cabinet no. 1-6
SS=Slot no. 01-12
C=Circuit no. 1-8
During a 3-Party Conference, if an extension dials digit(s), DTMF
FF1 1 01 0016 Hold (1-255) Hold
FF1 1 01 0017 Hold (1-255) Hold
FF2 0 BSSC
B=Cabinet no. 1-6
SS=Slot no. 01-12
C=Circuit no. 1-8
DBS 576 (USA) issued 05/20/98
01 13 Hold (0-2) Hold
FF1 1 01 0018 Hold (1-255) Hold
FF1 1 01 0019 Hold (1-255) Hold
01 14 Hold (0-2) Hold
Section 400-Programming
$
%2" $%) %,4
0=DTMF Pattern #1
1=DTMF Pattern #2 (default)
2=DTMF Pattern #3
$ 
%2" $%) ,
0=DTMF Pattern #1 (default)
1=DTMF Pattern #2
2=DTMF Pattern #3
Introduction
0
System
Configuration
FF1
System
FF2
Trunks
FF3
Extensions
FF4
FF-/Soft Keys
FF5
Groups
FF6
TRS/ARS
FF7
Applications
FF8
Maintenance
Appendix A
Appendix B
576-13-400