Ff5 6: Call Pickup Groups - Panasonic DBS-576 Technical Manual

Section 400-Programming
Introduction

FF5 6: Call Pickup Groups

0
System
Configuration
Call Pickup Group Members
(all CPCs) - Version 1.0 or higher
FF1
Assign extensions as members of a Call Pickup Group.
System
FF2
Trunks
Call Pickup Group No.
NOTE: Available range depends
on the CPC used:
FF3
with a CPC-96: Group No. 01-12
with a CPC-288: Group No. 01-36
Extensions
with a CPC-576: Group No. 01-72
Notes:
FF4
FF-/Soft Keys
Group Call Pickup can be performed for both single-ringing calls (ringing only one extension) or
multiple-ringing calls (ringing on multiple extensions).
The following types of single-ringing calls can be retrieved via Group Call Pickup:
FF5
DIL (Direct-In Line)
Groups
DID (Direct Inward Dialing)
DISA (Direct Inward System Access)
Caller ID
FF6
Network
TRS/ARS
Intercom (tone and voice)
Virtual
FF7
The following types of multiple-ringing calls can be retrieved via Group Call Pickup:
Applications
Multiple Incoming trunks
BLF (Busy Lamp Field)
FF8
Related Programming:
Maintenance
Appendix A
Appendix B
576-13-400
FF5 6 (01-72)
Call Pickup Group Member No.:
01=Member #1
02=Member #2
...
20=Member #20
DBS 576 (USA) issued 05/20/98
(01-20) Hold (1-9999)
FF5: Groups
$
$'4 B6 28
Hold
Extension No. (1-9999)
default: [no assignment]
Page 5-25
Introduction
0
System
Configuration
FF1
System
FF2
Trunks
FF3
Extensions
FF4
FF-/Soft Keys
FF5
Groups
FF6
TRS/ARS
FF7
Applications
FF8
Maintenance
Appendix A
Appendix B