Panasonic DBS-576 Technical Manual page 356

FF2: Trunk Programming (T1 CO)
Related Programming:
Introduction
DID/DNIS Dial Table ("A" Side) (pg. 1-169)
DID/DNIS Dial Table ("B" Side) (pg. 1-171)
Extension Number Assignment (pg. 3-4) for digital keyphones/SLTs
Extension Number Assignment (pg. 3-29) for S-point ISDN extensions
0
Extension Number Assignment (pg. 3-40)
System
Configuration
FF-Key Feature Assignment (Digital Keyphones, SLTs, EM24s) (pg. 4-7) FF4 0 BSSC 0 (01-32) Hold FLASH
(Code) Hold
FF-Key Feature Assignment (DSS/72) (pg. 4-14)
Attendant HG Pilot Number (pg. 5-3)
FF1
FF5 1: Extension Hunt Groups (pg. 5-13)
System
Closed Number Table: Digit String (pg. 6-42)
SSD Numbers (pg. 8-46)
FF2
Trunks
Day2 Ring Type
(all CPCs) - Version 1.0 or higher
Set the T1 channel's ringing type for incoming calls during Day2 mode.
FF3
Extensions
FF4
BSSCC: T1 (CO) Channel Position
FF-/Soft Keys
FF5
Groups
FF6
TRS/ARS
Day2 Ring Destination
(all CPCs) - Version 1.0 or higher
Assign a destination extension, Hunt Group, SSD code, or Attendant Hunt
FF7
Group for a "DIL" (Direct In-Line) setting in the above address).
Applications
FF8
Maintenance
BSSCC: T1 (CO) Channel Position
B=Cabinet no. 1-6
SS=Slot no. 01-12
CC=Channel no. 01-24
Appendix A
Appendix B
Page 2-108
FF5 0 01 Hold (0-9999) Hold
FF8 1 02 Hold 0 Hold Hold (SSD) Hold FLASH (Phone No.) Hold
FF2 2 BSSCC
B=Cabinet no. 1-6
SS=Slot no. 01-12
CC=Channel no. 01-24
FF2 2 BSSCC
(if "3=DIL to Extension")
(if "4=DIL to Hunt Group")
(if "5=DIL to SSD")
(if "6=DIL to Attendant")
DBS 576 (USA) issued 05/20/98
FF1 4 02 (000-575) (1-6) Hold (0-9999 or 1-72) Hold
FF1 4 04 (000-575) (1-6) Hold (0-9999 or 1-72) Hold
FF3 2 (001-576) 00 Hold (0-9999) Hold
FF4 1 BSSC 0 (01-72) Hold FLASH (Code) Hold
FF6 2 07 (001-150) 0001 Hold (1-4 digits) Hold
04 2 Hold (0-6) Hold
0=Multiple Incoming (default)
1=DID or DNIS
2=DISA
3=DIL to Extension
4=DIL to Hunt Group
5=DIL to SSD
6=DIL to Attendant Hunt Group
04 3 Hold (0-9999) Hold
Destination Number:
Ext.No., Virtual Ext.No., or Closed No.
Extension Hunt Group No. (1-72)
SSD Code No.
Attendant Hunt Group Pilot No.
default: [no assignment]
Section 400-Programming
FF3 0 BSSC 02 Hold (0-9999) Hold
FF3 1 BSSC 01 Hold (0-9999) Hold
$ 
  %6
$ 
!
576-13-400
Introduction
0
System
Configuration
FF1
System
FF2
Trunks
FF3
Extensions
FF4
FF-/Soft Keys
FF5
Groups
FF6
TRS/ARS
FF7
Applications
FF8
Maintenance
Appendix A
Appendix B