Panasonic DBS-576 Technical Manual page 191

Section 400-Programming
Introduction
CO Delayed Ring Timer (Day1)
(all CPCs) - Version 1.0 or higher
Set how long the system will ring an extension receiving an incoming call
0
during Day1 mode, before moving the call to the Delayed Ring position.
System
Configuration
FF1
System
FF2
Trunks
Notes:
This timer applies to unanswered incoming calls on a DIL trunk that has a Delayed Ring position set (in
FF3
FF2). If no Delayed Ring position is set for the trunk, this Timer will not apply, and the call will
Extensions
continue to ring the extension indefinitely.
Related Programming:
FF4
Day1 Delayed Ring Type/Destination ...
FF-/Soft Keys
for analog CO trunks (pg. 2-31)
for ISDN trunks (pg. 2-78)
for T1 CO trunks (pg. 2-110)
FF5
Groups
CO Delayed Ring Timer (Day2)
(all CPCs) - Version 1.0 or higher
FF6
Set how long the system will ring an extension receiving an incoming call
TRS/ARS
during Day2 mode, before moving to the Delayed Ring position.
FF7
Applications
FF8
Maintenance
Notes:
This timer applies to unanswered incoming calls on a DIL trunk that has a Delayed Ring position set (in
Appendix A
FF2). If no Delayed Ring position is set for the trunk, this Timer will not apply, and the call will
continue to ring the extension indefinitely.
Appendix B
576-13-400
FF1 1 02 0003 Hold (0-255) Hold
(1-255 = no. of seconds):
FF2 0 BSSC 04 0 Hold (0-4) Hold (0-9999) Hold
FF2 1 BSSC 05 0 Hold (0-4) Hold (0-9999) Hold
FF2 2 BSSCC 05 0 Hold (0-4) Hold (0-9999) Hold
FF1 1 02 0004 Hold (0-255) Hold
(1-255 = no. of seconds):
DBS 576 (USA) issued 05/20/98
0 = 5 seconds (default -
1 = 1 second
2 = 2 seconds
...
255 = 255 seconds
0 = 5 seconds (default -
1 = 1 second
2 = 2 seconds
...
255 = 255 seconds
FF1: System Programming
, 
all CPCs, Version 1.3 and higher

, 
all CPCs, Version 1.3 and higher
Page 1-129
Introduction
0
System
Configuration
FF1
)
System
FF2
Trunks
FF3
Extensions
FF4
FF-/Soft Keys
FF5
Groups
FF6
TRS/ARS
FF7
Applications
)
FF8
Maintenance
Appendix A
Appendix B