Panasonic DBS-576 Technical Manual page 100

FF1: System Programming
If Onhook Transfer is disabled, the user must press PROG or RELEASE before hanging up, in order to
Introduction
transfer the call.
An SLT requires Onhook Transfer to be enabled (set to "0").
Related Programming:
0
System
Extension COS: Onhook Trunk-to-Trunk Transfer (pg. 1-70)
Configuration
FF1
Extension COS: Onhook Transfer at Talk
System
(all CPCs) - Version 1.0 or higher
Allow/Restrict the ability of extensions in this Class of Service (COS) to
FF2
perform Onhook Transfer after the called party answers.
Trunks
FF3
Extensions
FF4
FF-/Soft Keys
FF5
Groups
Notes:
Onhook Transfer at Talk: (also called "Supervised Transfer") Put call on hold, dial the extension
FF6
to transfer to, wait for someone to answer, then hang up. The called extension will automatically
TRS/ARS
connect to the call.
If Onhook Transfer is disabled, the user must press PROG or RELEASE before hanging up, in order to
transfer the call.
FF7
(all CPCs - Version 1.3 and higher)
Applications
dialing the VM port will automatically send the call to Voice Mail. See SLT Voice Mail Connection on
pg. 3-11 to define the extension as a VM port.
An SLT requires Onhook Transfer to be enabled (set to "0").
FF8
Maintenance
Related Programming:
Extension COS: Onhook Trunk-to-Trunk Transfer (pg. 1-70)
SLT Voice Mail Connection (pg. 3-11)
Appendix A
Appendix B
Page 1-38
FF1 0 03 (00-15) 03 Hold (0 or 1) Hold
Extension COS Nos. 1-16
00=COS 1 08=COS 9
01=COS 2 09=COS 10
02=COS 3 10=COS 11
03=COS 4 11=COS 12
04=COS 5 12=COS 13
05=COS 6 13=COS 14
06=COS 7 14=COS 15 (for VM)
07=COS 8 15=COS 16 (for Attendant)
Exception: This address does not apply to VM ports. Hanging up after
FF3 0 BSSC 04 06 Hold (0 or 1) Hold
DBS 576 (USA) issued 05/20/98
Section 400-Programming
FF1 0 03 (00-15) 45 Hold (0 or 1) Hold
0=Allow Onhook Transfer at talk. (default)
1=Do not allow Onhook Transfer at talk.
FF1 0 03 (00-15) 45 Hold (0 or 1) Hold
Introduction
0
Configuration
FF1
System
))#) .3 %,4
<))=#   >
FF2
Trunks
FF3
Extensions
FF4
FF-/Soft Keys
FF5
Groups
FF6
TRS/ARS
FF7
Applications
FF8
Maintenance
Appendix A
Appendix B
576-13-400
System