Panasonic DBS-576 Technical Manual page 485

Section 400-Programming
Related Programming:
Introduction
FF6 0 01: Analyze Digits Table (pg. 6-10)
0
System
Configuration Leading Digits Table: Follow Digit Maximum
(all CPCs) - Version 1.0 or higher
(for ARS/TRS only) For each Leading Digits entry, enter the maximum number
FF1
of digits a phone user can dial after the digits defined in Leading Digits Table:
System
Prefix String (pg. 6-6).
FF2
Trunks
FF3
Extensions
Notes:
This address applies only to ARS/TRS routing; it does not apply when TRS is used without ARS.
FF4
The system will start analyzing the call immediately after the end-user has dialed the maximum number
FF-/Soft Keys
of digits set in this address (1-16). However, if this address is set to 0 (no maximum), the system
doesn't know how many digits will be dialed. Therefore, the system will wait until the appropriate
Interdigit Timer expires before processing the call.
FF5
Groups
Related Programming:
Leading Digits Table: Prefix String (pg. 6-6)
Interdigit Timer (ARS and ISDN CO) (pg. 1-120)
FF6
Interdigit Timer (DP SLTs) (pg. 1-141)
Interdigit Timer (DTMF SLTs) (pg. 1-142)
TRS/ARS
Interdigit Timer (Digital Keyphones) (pg. 1-142)
FF7
Applications
FF8
Maintenance
Appendix A
Appendix B
576-13-400
FF6 0 00 (001-100) 0003
Leading Digits Entry
(Bin) No. 001-100
DBS 576 (USA) issued 05/20/98
Hold (0-16) Hold
Maximum No. of Dialed Digits Allowed
after Prefix String (0-16)
default: 0 (no maximum)
FF6 0 00 (001-100) 0001 Hold (up to 10 digits) Hold
FF1 1 01 0010 Hold (1-255) Hold
FF1 1 03 0006 Hold (0-255) Hold
FF1 1 03 0007 Hold (0-255) Hold
FF1 1 03 0008 Hold (0-255) Hold
FF6: TRS/ARS
Introduction
0
Configuration
5  "!,,!; 1%
FF1
System
FF2
Trunks
FF3
Extensions
FF4
FF-/Soft Keys
FF5
Groups
FF6
TRS/ARS
FF7
Applications
FF8
Maintenance
Appendix A
Appendix B
Page 6-7
System