Panasonic DBS-576 Technical Manual page 367

Section 400-Programming
Introduction
Auto Answer for Outbound Calls
(all CPCs) - Version 1.0 or higher
Set whether the system will automatically assume that an outgoing call on this T1
0
channel has been answered by the other end, without waiting for an answer signal.
System
Configuration
FF1
System
BSSCC: T1 (E&M Tie) Channel Position
B=Cabinet no. 1-6
SS=Slot no. 01-12
CC=Channel no. 01-24
FF2
Trunks
Notes:
FF3
This address should be set to "1" (Enable) if the other system does not send back an answer signal, or if
Extensions
the trunk is used for paging calls.
Related Programming:
FF4
Auto Answer Timer (pg. 2-125)
FF-/Soft Keys
FF5
Frame Format
Groups
(all CPCs) - Version 1.0 or higher
Set the framing format ordered from the CO (assign to Channel #1).
FF6
TRS/ARS
FF7
BSSCC: T1 (E&M Tie)
Channel Position ("01" only):
Applications
FF8
Maintenance
Notes:
This setting is available only for Channel 01.
"SF" stands for SuperFrame (also known as D4), in which sampling frames are transmitted in groups of
12.
Appendix A
"ESF" stands for Extended SuperFrame, in which sampling frames are transmitted in groups of 24. ESF
provides monitoring and maintenance capabilities that aren't available with SF.
Appendix B
576-13-400
FF2 2 BSSCC
FF2 2 BSSCC 02 15 Hold (0-3) Hold
FF2 2 BSSCC
B=Cabinet no. 1-6
SS=Slot no. 01-12
CC=Channel no. 01
DBS 576 (USA) issued 05/20/98
FF2: Trunk Programming (T1 E&M Tie)
02 05 Hold (0 or 1) Hold
0=Disable Auto Answer (default).
Wait for answer signal from other end
before opening voice path.
1=Enable Auto Answer. Open voice path
without waiting for answer signal.
02 06 Hold (0 or 1) Hold
0=SF (default)
1=ESF
Introduction
$
/-! ' /;
0
Configuration
FF1
System
FF2
Trunks
FF3
Extensions
FF4
FF-/Soft Keys
FF5
$ 
Groups
" "!
FF6
TRS/ARS
FF7
Applications
FF8
Maintenance
Appendix A
Appendix B
Page 2-119
System