Ff8 0 02: Trunk Names - Panasonic DBS-576 Technical Manual

Section 400-Programming
Introduction

FF8 0 02: Trunk Names

0
System
Trunk Name Assignment
Configuration
(all CPCs) - Version 1.0 or higher
Assign names to trunks. The trunk name will display on the phone whenever the
trunk is used on that phone.
FF1
System
FF8 0 02 Hold Hold (1-576) Hold FLASH (up to 10 char.) Hold
FF2
Trunks
NOTE: See illustrations, next page for
FF3
Extensions Notes:
To Assign Trunk Names using a display phone:
First, press FLASH to clear current data (if any).
FF4
Then press the soft key that represents the group of letters you want to choose from.
FF-/Soft Keys
Then press one of the FF-keys on the bottom row (underneath the LCD), that is in the same position
as the letter you want to choose.
FF5
Use the * key to erase an entry. Use the # key to enter a space.
Groups
Press Hold when finished.
See illustrations, next page.
FF6
TRS/ARS
Related Programming:
Trunk Number Assignment (pg. 2-7) for analog CO trunks
Trunk Number Assignment (pg. 2-37) for analog E&M tie-trunks
FF7
Trunk Number Assignment (1st Channel) (pg. 2-60) for ISDN trunks
Applications Trunk Number Assignment (pg. 2-87) for T1 CO trunks
Trunk Number Assignment (pg. 2-116) for T1 E&M tie-trunks
FF8
Maintenance
Appendix A
Appendix B
576-13-400
Trunk No. 1-576
Trunk Name Assignment examples.
DBS 576 (USA) issued 05/20/98
(clears current data)
Trunk Name
(up to 10 characters)
default: [no assignment]
FF2 0 BSSC 00 Hold (0-576) Hold
FF2 0 BSSC 00 Hold (0-576) Hold
FF2 1 BSSC 01 Hold (0-576) Hold
FF2 2 BSSCC 01 Hold (0-576) Hold
FF2 2 BSSCC 01 Hold (0-576) Hold
FF8: Maintenance
Introduction
0
,
Configuration
/ 7  * " 
FF1
System
FF2
Trunks
FF3
Extensions
FF4
FF-/Soft Keys
FF5
Groups
FF6
TRS/ARS
FF7
Applications
FF8
Maintenance
Appendix A
Appendix B
Page 8-19
System