Panasonic DBS-576 Technical Manual page 316

FF2: Trunk Programming (ISDN)
Introduction
Long Talk Alarm
(all CPCs) - Version 1.0 or higher
Enable/Disable the alarm tone heard by an extension user during an outbound
0
call on this trunk, if the call lasts longer than the Long Talk Alarm Timer.
System
Configuration
FF1
System
BSSC: ISDN Trunk Position
FF2
Trunks
Notes:
By default, individual extensions are enabled for the Long Talk Alarm (via Extension COS setting).
FF3
Extensions
Related Programming:
Long Talk Alarm #1 Timer (pg. 1-134)
Long Talk Alarm #2 Timer (pg. 1-135)
FF4
Extension COS: Long Talk Alarm (pg. 1-66)
FF-/Soft Keys
FF5
Alarm Ringing
Groups
(all CPCs) - Version 1.0 or higher
Enable/Disable Alarm Ringing for incoming calls on this trunk that ring unanswered
for longer than the Slide Ring/Alarm Ring Timer.
FF6
TRS/ARS
FF7
BSSC: ISDN Trunk Position
Applications
FF8
Maintenance
Notes:
Alarm Ringing: Ringing frequency/interval changes for an incoming call that rings unanswered for
longer than the Slide Ring/Alarm Ring Timer.
Appendix A
Alarm Ringing will not work while Slide Ringing or Delayed Ringing is occurring.
Appendix B
Page 2-68
FF2 1 BSSC
B=Cabinet no. 1-6
SS=Slot no. 01-12
C=Circuit no. 1-4 (BRI)
or 1 (PRI)
FF2 1 BSSC
B=Cabinet no. 1-6
SS=Slot no. 01-12
C=Circuit no. 1-4 (BRI)
or 1 (PRI)
DBS 576 (USA) issued 05/20/98
03 05 Hold (0 or 1) Hold
0=Disable Long Talk Alarm. (default)
1=Enable Long Talk Alarm.
FF1 1 02 0010 Hold (0-255) Hold
FF1 1 02 0011 Hold (0-255) Hold
FF1 0 03 (00-15) 40 Hold (0 or 1) Hold
03 06 Hold (0 or 1) Hold
0=Disable Alarm Ringing. (default)
1=Enable Alarm Ringing.
Section 400-Programming
$
5! %,4 /,
$ 
/, 
576-13-400
Introduction
0
System
Configuration
FF1
System
FF2
Trunks
FF3
Extensions
FF4
FF-/Soft Keys
FF5
Groups
FF6
TRS/ARS
FF7
Applications
FF8
Maintenance
Appendix A
Appendix B